User Manual

HOW-TO SECTION

See Figure 27 for propylene

glycol-base coo lant concentration

versus freezing and boiling

temperatures.

Always verify that the freeze point

and nitrite concentration of the

antifreeze/water mixture are correct

by using a POWER Trac®3–Way

Coolant Test Strip. If chemical

analysis is used, elements in the

coolant must fall within th e limits

listed in Table 22.

Figure 27 Coolant Temperatu res vs. IPG Concentr ation (Sea Level)

100 All information subject to change without notice. (Rev. 01/04)