User Manual

SERIES 50 OPERATOR'S GUIDE
SPECIFICATIONS
This section lists the fuel and
lubrication oil filters needed for the
Series 50 engine. Also listed as
the various POWER COOL®engine
products
Fuel and Lubricating Oil
Filters
The fuel filters and th eir part numbers
are listed in Table 34. The lubricating
oil filters and their part num bers are
listed in Table 35.
Filter Type Detroit Diesel Part No.
Primary — Spin-On
23530706
Primary Fuel/Water Separator
— Spin-On
†
23512317
†
Secondary — Spin-On 22530707
Primary — Fuel Pro 380/382 Element 23521528 or 23529168#
# Elemax™ extended service element (optional).
† O ptional. May be used in place of, but not together with, the primary
filter.
Table 34 Fuel Filters — Series 50 Regualr Service
Filter Type Detroit Diesel Part No.
Full Flow 23530573
Full Flow (High Capacity)
DELF3998
Table 35 Lubricating Oil Filters
Oil Pan
All Series 50 truck oil pans (front
sump and rear sump) require the same
amount of engine oil.
Oil Pan Capacity — 19 quarts to
the LOW mark without oil filters. 22
quarts to the F ULL mark w ithout oil
filters.
Total Oil Capacity Of The
Engine — 29 quarts to the FULL
mark with oil filters installed and
filters and oil galleries charged.
All information subject to change without notice. (Rev. 01/04) 155
DDC-SVC-MAN-0058 Copyright © 2004 DE TROIT DIESEL CORPORATION