User Manual

Page 7 of 39 DETROIT DDC-ENG-MAN-0001
With this configuration:
- A transmission cooler will be added to DT12 configuration in SpecPro
- Some exhaust configurations are not compatible with DT12 Rear PTO. Please consult with your local
vehicle representative to obtain specifics.
- Harnesses and controls are included for the Rear PTO which is installed at a later time
- The pneumatic airline is NOT installed and would need to be added at the time of PTO install.
- Consult Section 8.28 of the GHG14/17 DDEC13 A&I Manual (DDC-SVC-MAN-0127) for CPC
parameterization
See DTNA PTO installation guideline document for installation instructions and torque specifications for
installing the DT12 Rear PTO drive assembly as well as the pneumatic line referenced above.
The dimensions for the Spicer 1350/1410 and 1310 series PTO flanges are listed in the figures below.
Figure 7: Spicer 1350/1410 series adapter flange, p/n A9472600317, for Rear PTO.