Manual

NEUTRAL
EARTH
HOT
- 120V HEATER INPUT -
120V
1.0 Safety
NEUTRAL
EARTH
HOT
- 120V HEATER INPUT -
120V
F/N: LLAC
Air Metering Orifi ce
Air Metering Orice
DO NOT REMOVE
TP-114
TP-3014
3"
SAMPLE
Air Metering Orice
SAMPLE
Air Metering Orice
DO NOT REMOVE
SAMPLE
DO NOT REMOVE
TP-114
SAMPLE
TP-114
TP-3014
SAMPLE
TP-3014
SAMPLE
SERVICE ACCESS PANEL
CONTROLS & GAS VALVE COMPARTMENT
1. Disconnect gas & electricity.
2. Remove four (4) thumbscrews.
3. Remove top cover.
4. Swing hinged panel downward.
KEEP COVER IN PLACE. REMOVE FOR SERVICE ONLY.
SERVICE ACCESS PANEL
IGNITER & FLAME SENSE COMPARTMENT
1. Disconnect gas & electricity.
2. Remove cover by lifting top
cover upward and outward.
CAUTION: HOT SURFACE.
KEEP COVER IN PLACE. REMOVE FOR SERVICE ONLY.
SERVICE ACCESS PANEL
FAN COMPARTMENT
1. Disconnect gas & electricity.
2. Remove top cover (2 thumbscrews).
3. Remove tsix (6) 1/4” screws.
4. Lift and remove panel.
KEEP COVER IN PLACE. REMOVE FOR SERVICE ONLY.
Safety Labels and Their Locations
Back Panel
Top Panel
Bottom Panel
F/N: LLTB018 (Natural Gas)
F/N: LLTB019 (LP Gas)
F/N: LLTCL001L2/LLTCL002C2/LLTCL002R
Safety & Clearance Labels
F/N: LLLOGO1 Re-Verber-Ray Logo Label
Product safety signs or labels should be replaced by the product user when they no longer are legible.
Contact either your local distributor or the product manufacturer for obtaining replacement signs or labels.
F/ N : LLV3EP1
F/ N : LLV3EP18
F/ N : LLV3EP6
(Operational Indicator Lights)
F/N: LLLOGO19
MP Series
Logo Label
3
MP Series
1.0 Safety • Safety Labels and Locations
Read and understand all safety information and warnings in this Insert Manual and the Tube
Heater General Manual before installation, operation and maintenance of the radiant tube
heater system.