Product Info
Table Of Contents
- 1 Validity of this documentation
- 2 Intended use
- 3 Disposal
- 4 Device description
- 5 Technical data
- 6 Functional description in detail
- 7 The EnoDisc® webserver
- 8 Installation and maintenance / service
- 9 Device labels
- 10 FCC (United States) Regulatory Statement
- 11 ISED Regulatory Statement
- 12 Dimensions / drawings
- 13 Ordering information
- 14 Revision history
AL-512-00-902 IP-EnOcean-Bridge PoE V1
Product manual Page 23 of 32
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:+49 2202 285 57- 61
14.07.2021 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0
Technical data might change info@deuta-controls.de; www.deuta-controls.dnet Fax:+49 5734 51466 - 28
7.4.2.6 Mailbox for EnOcean SmartAck devices
The EnoDisc supports the SmartAck mechanism as defined by the EnOcean
specification.
7.5 Supported EEP’s (EnOcean Equipment Profiles)
7.5.1 Transmit / TX and Receive / RX
The EnOcean wireless standard defines so called EnOcean Equipment Profiles
(EEP). Each EnOcean based product sends and receives data according to at least
one standardized data format. The EnoDisc transmits and receives data independent
of the EEP, since contents of the messages are not interpreted.
As a result, the EnoDisc is in principle a transparent bi-directional gateway between
EnOcean and Ethernet.