Product Info
Table Of Contents
- 1 Validity of this documentation
- 2 Intended use
- 3 Disposal
- 4 Device description
- 5 Technical data
- 6 Functional description in detail
- 7 The EnoDisc® webserver
- 8 Installation and maintenance / service
- 9 Device labels
- 10 FCC (United States) Regulatory Statement
- 11 ISED Regulatory Statement
- 12 Dimensions / drawings
- 13 Ordering information
- 14 Revision history
AL-512-00-902 IP-EnOcean-Bridge PoE V1
Product manual Page 25 of 32
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:+49 2202 285 57- 61
14.07.2021 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0
Technical data might change info@deuta-controls.de; www.deuta-controls.dnet Fax:+49 5734 51466 - 28
Dismantle the Ethernet cable as required. Start to mount the interface with the LSA
connector board. Connect / mount the two housings with a rotation of approx. 10°.
Use an LSA tool to setup the electrical connection. Take care to connect cable according
to the colours as marked on the connector.