User guide

16
Connecting Devices
Setting the Dialling Mode for the Analogue Terminals
The communications system automatically recognises analogue terminals with DTMF
dialling and a flash function; you do not have to set anything.
Analogue terminals with pulse dialling must be enrolled before they can be used:
pick up the handset, dial any digit other than 1, then replace the handset.

• USB on: the USB interface to the connected PC is busy.
• USB flickers: data is being transferred to the connected PC.
• LAN 1 on: there is a connection to the connected PC.
• LAN 1 flickers: data is being transferred between the router and the connected PC.
• LAN 2 on: there is a connection to the connected PC.
• LAN 2 flickers: data is being transferred between the router and the connected PC.
• LAN 3 on: there is a connection to the connected PC.
• LAN 3 flickers: data is being transferred between the router and the connected PC.
• T-DSL/LAN 4 on: there is a connection to the connected PC .
• T-DSL/LAN 4 flickers: data is being transferred between the router and the con-
nected PC.