Operating instructions

- 12 -
4-6 Replacement of stirrer motor
1. Disconnect power and remove grille screws(2).
2. Remove grille and the bracket duct upper screw(1).
3. Remove the bracket duct upper and disconnect the
stirrer motor wire.
4. Remove stirrer motor screws(1) and lift up stirrer
motor after turn left.
The stirrer is located on the upper side of the cavity. The oven uses a top feed wave guide.
1. Disconnect power and open the door.
2. Remove the clip and turn the stirrer cover left.
3. Remove stirrer cover and the stirrer will come with
it.
4. Replace the clip if the clip head broken.
CLIP
COVER STIRRER
STIRRER ASSEMBLY
COVER STIRRER
STIRRER MOTOR
4-7 Removal of stirrer