Specifications

Service Training
Page 4.2
Section 64
09.04
C
D
Set Δp to 11
+ 0.1
bar at valve (44) of travel control unit.
Δp can be obtained.
yes
no
Remove adapter III at ports YF and ZF and install LP gauge with adapter II to
ports YF and ZF. With F and R accelerator pedals depressed to the stop, set
Δp to 11
+ 0.1
bar.
Average wheel speed
155 - 165 rpm
In order.
yes
See "Hydrostatic travel drive".
no
Δp obtained.
yes
no
Fully depress the F or R accelerator pedal. Measure the rotation of the left and
right wheel and calculate the average wheel rpm.
Fault in hydraulic remote
control. Repair or renew
remote control.
Fault in travel control
unit. Repair or renew the
unit.