Specifications

Service Training
Page 4.2
Section 68
09.04
CD
yes no
Fully depress the F and R accelerator pedals with the brake pedal released.
CAUTION: Rotating wheels.
yes no
Motor reaches
maximum speed.
EF
Install LP gauge with adapter III to ports Y and Z of remote control. Bridge the
footbrake microswitches and start the engine with the brake released.
Δp is 12 bar minimum.
Install banjo bolt 1.17 with plug at ports E and F of the travel control unit. Repeat
the test.
Clean and re-install nozzles in ports YF and ZF. Repeat the test.
See "Hydraulic speed
control".
noyes
Pressure at
one gauge rises quickly to
value obtained at port F, while pressure
at second gauge lags for a
long time.
Valve (33) (13 bar) dirty
or setting incorrect.
Clean or correct the
setting.
Fault in travel control unit.
Possible causes: Valve
(47) sticking in open
position. Setting of valve
(46) (brake shaft)
incorrect. Valve (44) (11
bar) dirty or setting
incorrect.