Specifications

Service Training
Page 4.2
Section 69
09.04
noyes
F
noyes
noyes
noyes
G
H
E
Δp between 12 and 14 bar.
Install banjo bolts 1.17 with plugs at ports E and F of travel control unit. Repeat
test with engine idling.
At max. speed, determine Δp between ports E and F.
See "Hydraulic speed
control".
Motor now
reaches maximum speed
at each side.
Δp between 12 and 14 bar.
Wheels rotate
both in forward and reverse
direction when pedals are
depressed.
Reconnect lines to ports
E and F and adjust valve
(44) (11 bar) at full throttle
to a Δp of 11 - 12 bar.
Set valve (33) to 13 bar.
Release the brake and depress the F and R accelerator pedals consecutively
approx. 1/3 of pedal stroke.