Specifications

Service Training
Page 4.2
Section 74
09.04
noyes
noyes
Remove adapter II with plug and install them at ports YF and ZF. Determine Δp
with brake released and pedals fully depressed.
noyes
PQ
R
S
Δp of 10 - 11 bar
now achieved.
Fully depress the F and R accelerator pedals with the brake released and
engine running. Determine the average wheel speed.
Δp now 10 - 11 bar.
Remove adapter III and screw in adapter II with plug. Determine Δp with the
brake released and pedals fully depressed.
Δp of
11 - 11 bar obtained to
both sides.
Fully depress the F and R accelerator pedals with the brake released and the
engine running. Read Δp when pedals are fully depressed.
Leak in the remote
control unit. Repair or
renew the unit.
Leak in control block of
power limiter, renew.
Travel control unit not
okay. Check setting and
adjust, if necessary, or
renew the unit.