Specifications

Service Training
Page 5
Section 4.5
4.5.2 SPEED CONTROL
4.5.2.1 SPEED CONTROL UP TO 10/95
ADJUSTMENT INSTRUCTIONS FOR DIMENSION X (LOWER IDLING SPEED)
- Retract the speed control cylinder (1) and slacken screw (4). Shift the adjusting lever (3) outward as far
as possible on lever (2).
- Tighten the screw (4).
- Slacken nut (6) and adjust dimension X to 0.1 mm by turning the ball cup (5). Lock the nut (6) against the
ball cup (5).
- Check dimension X with a 0.1 mm feeler gauge.
09.96