Technical information

3
© 2001
If possible, do not suddenly switch off the
engine when under full load.
Turn key counterclockwise (to position 0)
and remove. The pilot lights will go out.
Move speed adjustment lever 1 to low idle.
Move shut-off lever 2 in the direction of “0”
until the engine comes to a stop. The charge
pilot light and the oil pressure pilot light will
come on when the engine stops.
Turn key counterclockwise (to position 0)
and remove. The pilot lights will go out.
Concerning electrical shut-off or power
failure, the shut-off lever 2 is disabled by the
solenoids until the engine stops. The charge
pilot light and the oil pressure pilot light
illuminate when the engine stops.
Turn key counterclockwise (to position 0)
and remove. The pilot lights will go out.
Engine Operation 3.4 Shutting Off
3.4.1 Mechanical shut-off 3.4.2 Electrical shut-off
Ignition key
© 25 746 2
© 35 588 0