Technical information

Index
1 General
2 Engine Description
2.1 Model
2.1.1 Rating Plate
2.1.2 Position of the Rating Plate
2.1.3 Engine Serial Number
2.1.4 Cylinder numbering
2.1.5 Direct injection
2.2 Engine Illustrations
2.2.1 Operation side BF3L 914
2.2.2 Air outlet side BF3L 914
2.2.3 Operation side F4L 914
2.2.4 Air outlet side F4L 914
2.2.5 Operation side BF6L 914
Intercooler over air-intake line
2.2.6 Air outlet side BF6L 914 C
Intercooler over air-intake line
2.2.7 Operation side BF6L 914 C
Intercooler over flywheel
2.2.8 Air outlet side BF6L 914
Intercooler over flywheel
2.3 Lube Oil Circuit Schematic
2.3.1 Lube Oil Circuit Schematic
2.4 Fuel System Plan
2.4.1 Fuel System
2.5 Engine cooling
2.5.1 Amount of cool air regulated by
exhaust thermostat
2.5.2 Amount of cool air regulated by
exhaust thermostat and solenoid valve
3 Engine Operation
3.1 Commissioning
3.1.1 Pour in Engine Oil
3.1.2 Filling Oil Bath Air Filter with Engine Oil
3.1.3 Pour in Fuel
3.1.4 Bleed
3.1.5 Other Preparations
3.1.6 Additional maintenance work
3.1.7 Change-over switch for oil heater
3.2 Starting
3.2.1 Starting
3.3 Monitoring Operation
3.3.1 Engine Oil Pressure
3.3.2 Engine temperature
3.3.3 Cooling fan drive
3.4 Shutting off
3.4.1 Mechanical shut-off
3.4.2 Electrical shut-off
3.5 Operating Conditions
3.5.1 Winter Operation
3.5.2 High Ambient Temperature, High
Altitude
4 Operating Media
4.1 Lube Oil
4.1.1 Quality
4.1.2 Viscosity
4.2 Fuel
4.2.1 Quality
4.2.2 Winter Fuel
5 Routine Maintenance
5.1 Maintenance Plan
5.2 Maintenance Diagram
5.3 Maintenance Work Completed
6 Service and Maintenance
6.1 Lube oil system
6.1.1 Oil change intervals
6.1.2 Check Oil Level / Change Engine Oil
6.1.3 Replace Oil Filter
6.1.4 Change bypass-oil filter use
6.2 Fuel System
6.2.1 Replace fuel filter
6.2.2 Precleaning fuel/clean fuel filter
6.3 Cooling system
6.3.1 Cleaning Intervals
6.4 Combustion Air Filter
6.4.1 Cleaning Intervals
6.4.2 Emptying Cyclone Type Precleaner
6.4.3 Clean Oil Bath Air Filter
6.4.4 Dry Type Air Cleaner
6.5 Belt Drives
6.5.1 Check V-belts
6.5.2 Change fan belt
6.5.3 Tension alternator belts
6.5.4 Change alternator belts
6.5.5 Check warning system
6.5.6 Tension/change air compressor
belts
6.5.7 Air compressor model with dual belts
6.6 Adjustments
6.6.1 Check valve clearance
(adjust if necessary)
6.7 Accessories
6.7.1 Battery
6.7.2 Rotary Current Alternator
6.7.3 Transportation Shackles
6.8 Engine cleaning
6.8.1 Engine cleaning
6.9 Additional Maintenance Work
6.9.1 Check fastenings
6.9.2 Check functioning of glow plugs
7 Faults, Causes and Remedies
7.1 Fault Table
8 Engine Preservation
8.1 Preservation
8.1.1 Preserve engine
8.1.2 Remove engine preservation
9 Technical Specification
9.1 Engine Specifications and
Settings
9.2 Screw Tightening Torques
9.3 Tools
10 Service