Remote Control Introduction System Introduction ‘Wireless Display via iOS. ‘Wireless Display via Android... VGA / HDMI output Introduction.
Accessory List Remote Control Power Cable AV Signal Cable ‘VGA Signal Cal Manual Spare Fuse Accessories which may be purchased separately: 1. Projection Screen 2. Ceiling Mount 20 ring Warning: Do not look directly into the light of the lens which could cause damage to your eyes, especially for children. 1X) Warning: De not place the projector on a wet surface, as this may result in an electric shock. except for professionals! ‘High voltage, do not sen, : A Important operating instruction.
Safety Precaution troubleshoot Please read this manual carefully prior to operating this projector and save for future reference. Please follow instructions when operating or repairing the projector. 1. Cleaning Unplug the power cable first. Clean the projector with a damp cloth. Liquid detergent and spray cleaner can not be used. 2, Accessories To avoid damage, use only the recommended accessories. 3. Wet Surfaces Do not place the projector on any wet surfaces.
VGA / HDMI output Introduction Caution Ste pl: Choose "Multi-Media" on the top tap of the main interface. Step: Chose "VGA / HDMI". Step: Connect the projector and PC with VGA / HDMI cable. Ste pd: Adjust the PC display resolution matching the projector, such as 1024x768, 1280x 800. Step: Press specific keys on your PC. Normal press "FN" & "F1~F12" simultaneously. {Due to brands are different, please check with your PC supplier for the specific keys). Step: Chose "Duplicate these displays”.
Installation Avoid direct sunlight to obtain best quality image. Curtains should be closed while using the projector during the day. Wireless Display via Android Ste pl: Connect the projector to WI-Fi network (please refer to chapter 3. connecting to WI-Fi). Step: Connect your Android device to the same WI-Fi network with projector. Step: Scan QR code shown on the screen to download the free app "Slaphappy. Ste pd: Open the Happy cast app on your device. Step: Chose "Cast xxx" from the connection list.
Wireless Display S Step: Connect the projector to WI-Fi network (please refer to chapter 3. connecting to WI-Fi). Step: Connect your iOS device to the same WI-Fi network with projector. Step: Choose "Multi-Media" on the top tap of the main interface. goose "Slaphappy. Step: On your i0S device, swipe up from the bottom on the home screen, and tap "Airplay / Screen Mirroring” to chose "Castanet. Wireless display will be realized.
Installation AN Installation Method Contact a professional installer to mount this projector to a ceiling, Follow the instructions below for the correct projector positions. screen ; Projects projector screen @ Front projection @ Rear projection ceiling mount ceiling mount screen ; %jemmy @ Front projection @ Rear projection table mount table mount Warring: 1. This projector may be damaged beyond repair if it is incorrectly mounted on a ceiling or on a surface. 2.
ARG EGGNOG Agitator el 3. Connecting to WI-Fi Ste pl: Choose "Settings” on the top tab of the main interface. Step: Find “Network Settings”, and tun WI-Fi on. Step: Select your "Wireless Network” from the list. Step: Type in the password and then click "Connect. Cool winds input ventilation 8. Speaker ; 2. Level-stand adjustment 9. Hot winds output ventilation " 3. IR receiver 10. Level-stand adjustment ' 4. Focus lens 11. Projector mount holes : 5. Keystone 12. Label i 6. Power switch 13.
Panel Key Instruction Var TR 1. Choosing the Signal Sources Ste pl: Open this projector and the main interface will be appeared. © " Step: Choose "Multi-Media" on the to tap of the main interface. I I Step: Chase one of a source from the left side, such as DTV, AV and Lol Power Key 2. Reading Files on USB Disk Press the power key to turn on or switch off the projector. This function is the same as Step: Insert the USB disk. “power”on the remote contra.
Remote Control Instruction Input Terminals Interface & |Power on jiff A | M |Mute ¥ [Down T Info crosstown display information | 4 ileitis FAV favorite channel > |Right List 4 [previous REC |Recording PP [Next track FRZ |Image static 44 Fast backward EPG microelectronics | P> |Fest forward | Android main interface M [Play/Pause S |Source m [Reuse R Aspect ratio OK |Confirm M |Menu Vol+/[volume+/- Name Instruction Exit |Exit CH+/ |channel Y/Pb/Pr |Component video input 1.23..
g On/Off Image Adjustment Turning on the projector: 1. Two new batteries should be installed into the remote control before use. o, 2. Turning on the power switch on the backboard, the indicator light will turn red. 3. Pressing the power key on the remote control or on the top panel, the indicator light will change to blue. T % 4. After a few seconds, the lamp will begin to work. 5. Using the projector for the first time, the image may appear blurry or distorted.