Specifications

MATERIALS OF CONSTRUCTION
Gun Body Anodized aluminium
Air Cap Nickel plated brass
Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud Stainless steel
Springs, Clips, Screws Stainless steel
Seals, Gaskets Solvent resistant
Trigger Chrome plated steel
Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut,
Air Cap Retaining Ring, Knobs
Chrome plated brass
Air Valve Assembly Stainless steel, HPDE
SPECIFICATIONS & TECHNICAL DATA
Air Supply Connection Universal 1/4" BSP and 1/4" NPS male
Maximum Static Air Inlet Pressure P1 = 175 psi (12 bar)
Nominal Gun Air Inlet Pressure for HVLP (HS1) and
Trans-Tech
®
(TS1 & RS1) with gun triggered
29 psi (2.0 bar)
Fluid Supply Connection 7/16 – 14 UNC
Service Temperature 32 to 104°F (0 to 40°C)
Gun Weight (gun only)
(with cup)
15.0 oz (425 g)
17.1 oz (485 g)
CONSTRUCTION FEATURES
1
Air Cap
(nickel plated brass for long durability)
2
Air Cap Retaining Ring
(allows easy rotation of air cap)
3 Fluid Nozzle
4
Fluid Needle
(grooved stem for easy removal)
5
Fluid Inlet (7/16” – 14 UNC thread) – accepts
DeVilbiss SRI cup systems
6
Air Inlet
(universal thread, accepts G 1/4 & 1/4 NPS)
7
Self Adjusting Needle Packing
(for trouble free operation)
8 Trigger (ergonomic for comfort)
9
Trigger Stud & Screw
(easy replacement design)
10
Fan Air Adjustment
(stepless regulation for fan to round spray)
11
Fluid Adjustment
(stepless regulation of fluid volume)
12
Anodized, forged aluminium gun body
(ergonomic, good looking & durable, easy
to clean)
13 125cc Acetal Cup (easy clean, anti-static)
14 Cup Lid with Drip Free Vent (avoid drips)
15
Air Valve (design offers low pull force & low
pressure drop)
16
Gun acceptable for waterborne and solvent
borne applications
KIT CONTENTS (ALL MODELS)
1 Compact MINI Gravity Feed Spraygun
1 Compact MINI Gravity Feed Cup
1 Cup Filter
1 Funnel
1 Spanner (6mm hex and 10mm A/F)
1 Torx/Flat Blade Screwdriver
1 Small Cleaning Brush
1 Large Cleaning Brush
1 Service Bulletin
Page 4 SB-2-858-B