DeVilbiss Air Power Company OWNERS MANUAL FOR PRESSURE WASHER Model No. W1212 SPECIFICATION CHART MODEL W1212 PUMP PRESSURE 1150 P.S.I. MAX FLOW RATE 1.2 G.P.M. VOLTAGE REQUIREMENT 120V/15 AMP/60HZ MINIMUM FUSE SIZE 15 AMP., TIME DELAY POWER CORD 35' HOSE 1/4"x 18' SWIVEL HIGH PRESSURE HOSE PKG. WEIGHT 20 LBS. INLET WATER PRESSURE 30-170 P.S.I.
TABLE OF CONTENTS PAGE WARRANTY STATEMENT...................................................... 3 SAFETY GUIDELINES ............................................................ 4 IMPORTANT SAFETY INSTRUCTIONS .............................. 4-5 GLOSSARY ............................................................................ 6 SERVICING OF A DOUBLE-INSULATED APPLIANCE .......... 6 GROUNDING INSTRUCTIONS/EXTENSION CORDS ........... 6 OPERATING INSTRUCTIONS ................................................
LIMITED WARRANTY ONE YEAR FROM DATE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user). Products covered under this warranty include: air compressors, *air tools, accessories, service parts, pressure washers, and generators used in consumer applications (i.e., personal residential household usage only).
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use symbols to the right. Please read the manual and pay attention to these sections. URGENT SAFETY INFORMATION - A HAZARD THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE. Information for preventing damage to equipment.
IMPORTANT SAFETY INSTRUCTIONS (cont'd) HAZARD WHAT COULD HAPPEN HOW TO PREVENT IT Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in serious injury or amputation. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! Fluid injection can lead to amputation. See a physician immediately.
GLOSSARY FLOW RATE: This is the amount of water that passes through your wand. (Usually measured in G.P.M., gallons per minute.). START/STOP: This unit will automatically start when the trigger is depressed and automatically stop when you release of the trigger. P.S.I.: Unit of measure, pounds per square inch. SERVICING OF A DOUBLE-INSULATED APPLIANCE In a double-insulated product, two systems of insulation are provided instead of grounding.
OPERATING INSTRUCTIONS START-UP OPERATION 1. Attach middle extension to gun/hose assembly by inserting the thread end and hand tighten. 1. For high pressure cleaning, attach rotary nozzle to middle extension wand (see #6 in Start-up). 2. Insert high pressure hose into pressure washer outlet port and hand tighten. 3. Connect garden hose to the pressure washer inlet port. Make sure the screen is free of any debris. 4.
MAINTENANCE AND STORAGE TO AVOID ELECTRICAL SHOCK, ALWAYS DISCONNECT THE PLUG FROM THE ELECTRICAL SUPPLY BEFORE ANY MAINTENANCE IS STARTED. IF AN EXTENSION CORD IS IN USE, DISCONNECT FROM OUTLET BEFORE DISCONNECTING PRESSURE WASHER CORD FROM EXTENSION CORD, AS ELECTRIC SHOCK COULD OCCUR. MAINTENANCE 1. WATER SCREEN: Inspect the water screen before attaching water supply. Clean water screen if dirty. 2. NOZZLE CLOGGED: A clogged nozzle will cause a distorted spray pattern and/or low pressure output. a.
TROUBLESHOOTING GUIDE PROBLEM CAUSE REMEDY Motor will not start and there is no humming sound • Not plugged in. • "RESET" button on GFCI not pushed. • Circuit breaker has tripped or fuse is blown. • Incorrect voltage. • Plug in. • Push "RESET" button. • Reset breaker or replace fuse. • Damaged cord. • Check whether the voltage shown on the specifications chart corresponds to that of the power source. • Inspect all cords for signs of damage.
ACCESSORIES/CLEANING SOLUTIONS 10—ENG
PRESSURE WASHER DIAGRAM Carrying Handle On/Off Switch Detergent Hose Connection Detergent Hose High Pressure Detergent Outlet Filter Power Cord Water Inlet Gun/Hose Assembly Wand Extension Trigger Lock Detergent Nozzle Spray Wand PARTS LISTING PW-0368 PW-0369 PW-0370 PW-0371 PW-0372 Gun/Hose Assembly Spray Wand Wand Extension Detergent Hose with Filter Detergent Nozzle 11—ENG
OWNERS MANUAL FOR PRESSURE WASHER Model No. W1212 When ordering repair parts from your local Authorized Service Center, always give the following information: • Model number of your product • Part number and description of the item you wish to purchase If you have any questions or need the location of the nearest Authorized Service Center, call our Customer Service Hotline Monday thru Friday 8:00 a.m. to 5:00 p.m. (CST) and talk with our trained Customer Service Representatives at 1-800-888-2468, Ext.
