Stapler Owners Manual

ManualsBrandsDeVillbiss Air Power Company ManualsStaple GunEx-Cell A05983

IMPORTANT

Please make certain that the

person who is to use this

equipment carefully reads and

understands these instructions

before starting operations.

ESPAÑOL: PÁGINA 13

FRANÇAISE : PAGE 25

DeVilbiss Air Power Company

Part No. A05983 - 07-22-04

Owners Manual

for models ENS100, ENS150

Staplers

Record All Information and attach sales

receipt here for future reference:

Purchase Date:__________________________

Serial #: ________________________________

Do Not return this product to the retailer!

Questions? 1-800-888-2468

Learn more about your tool, get answers

to frequently asked questions, and

www.devap.com

Summary of content (12 pages)

PAGE 1
Staplers Owners Manual for models ENS100, ENS150 Record All Information and attach sales receipt here for future reference: Purchase Date:__________________________ Serial #: ________________________________ Do Not return this product to the retailer! Questions? 1-800-888-2468 Learn more about your tool, get answers to frequently asked questions, and register on line at www.devap.
PAGE 2
TABLE OF CONTENTS SAFETY GUIDELINES AND INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . .3 GENERAL SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6 FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PREPARING THE TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10 MAINTENANCE . . . . . . . . .
PAGE 3
SAFETY GUIDELINES / DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
PAGE 4
GENERAL SAFETY RULES Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Fig. 1. Fig. 1 2. Operator and others in work area MUST wear safety glasses with side shields. These safety glasses must conform to ANSI Z87.1 requirements (approved glasses have “Z87” printed or stamped on them). Fig. 2. 3. Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger.
PAGE 5
9. Do not connect tool to pressure which potentially exceeds 200 PSI (13.7 BAR). 10. All air line components (hoses, connectors, filters, regulators, etc.) must be rated for a maximum working pressure of at least 150 PSI (10.3 BAR) or 150% of the maximum system pressure, which ever is greater. Fig. 7 11. Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected. Fig. 7. Fig. 8 12.
PAGE 6
21. Do not load fasteners with trigger or safety depressed, to prevent unintentional firing of a fastener. Fig. 13 22. Remove finger from trigger when not driving fasteners. Never carry tool with finger on trigger. Contact Actuation tools will fire a fastener if the safety mechanism is bumped while trigger is depressed. Fig. 14. Fig. 13 Fig. 14 23. Do not overreach. Keep proper footing and balance at all times when using or handling the tool. 24.
PAGE 7
EMPLOYER’S RESPONSIBILITIES Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. Keep this manual available for use by all people assigned to use this tool. For personal safety and proper operation of this tool, read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Read and follow all of these instructions carefully.
PAGE 8
PREPARING THE TOOL NOTE: This tool is shipped completely assembled. No assembly time or tools are required. 1. After reading and understanding this entire manual, connect tool to air supply (Fig. 18). 2. Depress latch and slide magazine core open (Fig. 19). 3. Turn the tool upside down. Insert a strip of fasteners into the magazine channel (A) Fig. 20. With the tool upside down, orient fasteners with points up in the magazine channel (B) Fig. 20. NOTE: Staples are loaded from the bottom. 4.
PAGE 9
OPERATING INSTRUCTIONS USING THE TOOL Complete all steps of PREPARING THE TOOL before using the tool. This tool is shipped from the factory with a “single sequential actuation” trigger. This actuation design requires the release of both the trigger and safety mechanism after each fastener is driven. Sequential actuation is the only triggering option available for this tool.
PAGE 10
CLEARING A JAMMED FASTENER 1. 2. 3. 4. Disconnect tool from air supply. Open magazine and remove remaining fasteners (Fig. 26 and Fig. 27). NOTE: Remove fasteners from tool before opening the fastener guide plate. Fasteners are under pressure and may shoot out of magazine which could cause injury. Depress the quick release latch and open the fastener guide plate (Fig. 28). Remove the jammed fastener (Fig. 29). Depress the quick release latch and close the fastener guide plate. Fig. 27 Fig. 26 Fig.
PAGE 11
SERVICE SERVICE AND REPAIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.devap.com for a list of service centers or call the Customer Care Department at 1-800-888-2468. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others.
PAGE 12
WARRANTY DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase. All products covered by this limited warranty which are used in commercial applications (i.e.