User`s manual

User’s Manual Version 1.2

Devolinx Serial-Ethernet Server

STE-601C

- 24 -

2. Please input the old password in the “Old Password” field, input the new password in the “New

Password” and the “Verified Password” fields, and then click on “Save Configuration” to update the

password.

Note: You can press the default key of product to reset password to the default value.

Network setup

Click on the “Networking” link and the following screen appears. Fill in IP information under TCP/IP field.

Alternatively, you can do the configuration by clicking on DHCP to obtain auto IP address, gateway and

subnet mask information.

Enable SNMP by checking “Enable”, fill in network identification information under SNMP field and click on

the “Save Configuration” button to save the changes, please notice that the setting will not become effective

until you restart STE-601C.