dLAN® pro 1200 DINrail Business SOLutions
® devolo dLAN pro 1200 DINrail
© 2015 devolo AG Aachen (Germany) While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. devolo shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo.
Contents Contents 1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1.1 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents devolo dLAN pro 1200 DINrail
Preface 5 1 Preface Thank you for placing your trust in this product. devolo dLAN business solutions are a favourably priced option to establish a broadband IP network in a building—using the power grid or according to the dLAN pro product also coax lines or two-wire lines. The dLAN pro 1200 DINrail, based on the HomePlug AV standard, transmits data, voice and video over the power line at rates up to 1200 Mbps.
6 Preface 1.1.1 Intended use Ensure that the dLAN pro 1200 DINrail is used according to its intended use in order to prevent damage to it or other devices: The intended use of the dLAN pro 1200 DINrail is connecting devices in the installation area (e.g. intelligent power meter (MUC), Internet access device) to the household dLAN network for data transmission (e.g. consumption data, Internet data).
Introduction 7 2 Introduction dLAN is an intelligent, secure technology that lets you set up a home network easily, quickly and economically via your household electrical wiring, without the need for complex and expensive dedicated cabling. The available performance and effort required for the installation also compares favourably to traditional methods. 2.
8 Introduction 2.2 dLAN pro 1200 DINrail The dLAN pro 1200 DINrail combines the power industry and telecommunications and brings you one step closer to transparent cost statements for your consumption data. The energy data is transmitted from the intelligent power meter to your computer via the household electrical wiring. With a transmission speed of up to 1200 Mbps, the dLAN pro 1200 DINrail is also ideally suited for high-speed Internet. Line connections Control lamps Reset Reset Fig.
Introduction 9 2.2.1 Functions 2.2.
10 Introduction 2.2.3 Control lamps Power (Fig.1) Illuminates green when the dLAN pro 1200 DINrail is ready to operate; flashes green when the dLAN pro 1200 DINrail is in standby mode. dLAN (Fig. 1) Illuminates green if the bandwidth is optimal, i.e. the network connection is suitable e.g. for HD video streaming; flashes when data is being transmitted. Illuminates orange if the bandwidth is good, i.e. the network connection is suitable e.g. for SD video streaming; flashes when data is being transmitted.
Introduction 11 2.3 Sample applications Use dLAN pro 1200 DINrail to set up a network easily, quickly and economically via the mains supply network dLAN pro 1200 DINrail as a link between the power industry and telecommunications for recording energy data Fig. 3 Fig.
12 Introduction devolo dLAN pro 1200 DINrail
Installation 13 3 Installation 3.1 Important safety instructions In this chapter we describe the electrical installation of the dLAN pro 1200 DINrail on the top-hat rail in the power distribution box. All safety and operating instructions should be read and understood before using the device, and should be kept for future reference. Package contents Please ensure that the delivery is complete before beginning with the installation of your dLAN pro 1200 DINrail.
14 Installation 쎲 Slots and openings on the case serve as ventilation. Never block or cover them. 쎲 Do not keep the device in direct sunlight. 쎲 Never set up the device near a heater or radiator. 쎲 The device should be located only where sufficient ventilation can be ensured. 쎲 Never use the device with a power supply that does not meet the specifications provided on the rating plate. 쎲 In the event of damage, contact customer service.
Installation 15 significantly longer range (range+) thanks to MIMO technology. Three-phase connection without residual current circuit breaker Single-phase connection without residual current circuit breaker Fig. 5 Fig. 4 In general, connection of the dLAN pro 1200 DINrail to one phase and to one neutral conductor is adequate, even for communicating over multiple phases. To optimise the data transmission, however, we recommend a connection with all three-phases and earth wire (PE).
16 Installation button. For information on how to proceed, refer to Chapter 4 dLAN pro network. For detailed information about connecting other devolo dLAN pro devices, visit our website www.devolo.com/en/business-solutions.
dLAN pro network 17 4 dLAN pro network Before you can use the dLAN pro 1200 DINrail in your dLAN pro network, first you have to connect it to other dLAN pro devices as a home network. Two specific pieces of information are especially important for this: 쎲 Shared use of the dLAN password serves as access control and results in a delimited dLAN pro network. 쎲 Shared use of a dLAN password serves as encryption of the dLAN pro network, and thereby the interception protection, of the transmitted data.
18 dLAN pro network Encrypting a new dLAN pro network with a dLAN pro 1200 DINrail and an additional dLAN pro device Once both dLAN pro devices have been successfully connected, press each encryption button for one second within two minutes of one another. That's it! Your dLAN pro network is now protected against unauthorised access.
dLAN pro network 19 Removing a dLAN pro device from a network To remove a dLAN pro 1200 DINrail or another dLAN pro device from an existing network, press its encryption button for at least ten seconds. The device will be assigned a new randomly generated password and will thus no longer be able to access the network. To integrate the device into a different dLAN pro network, follow the steps described above, depending on whether you are setting up a new network or adding the device to an existing one. 4.
20 dLAN pro network devolo dLAN pro 1200 DINrail
Appendix 21 5 Appendix a) The warranty covers the equipment delivered and all its parts. Parts will, at devolo's sole discretion, be replaced or repaired free of charge if, despite proven proper handling and adherence to the operating instructions, these parts became defective due to fabrication and/or material defects. Alternatively, devolo reserves the right to replace the defective product with a comparable product with the same specifications and features.
22 Appendix 3 Warranty procedure a) If defects appear during the warranty period, the warranty claims must be made immediately, at the latest within a period of 7 days. b) In the case of any externally visible damage arising from transport (e.g. damage to the housing), the person carrying out the transportation and the sender should be informed immediately.
Index C CE 6 Circuit breaker 13 Conductor cross-section 9 D Disposal of old devices 21 dLAN pro network 17 E earth 14 Earth wire 9, 14 Encryption button 10, 17 External conductor 14 G Gigabit-Ethernet connection 13 Gigabit-Ethernet port 9 I Installation alignment 14 Intended use 6 P Package contents 13 PE connection 9, 14 PE terminal 9 Q Qualified electrician 13 R Reset 10 S Safety instructions 13 Single-phase connection 9, 14, 15 System requirements 13 T Terminals 9, 14 Three-phase connection 9, 14 W Warr
devolo dLAN pro 1200 DINrail