User Manual

Introduction 24
devolo Magic 2 WiFi next
2.2.5Reset button
The reset button (next to the network ports) has
two different functions:
Restart
The device restarts if you press the reset button for
less than 10 seconds.
Reset—Factory default settings
1 To remove a devolo Magic adapter from your
devolo Magic network and successfully restore
its entire configuration to factory defaults,
press and hold the reset button longer than
10 seconds.
Be aware that this loses all changes to all set-
tings!
2 Wait until the LED flashes white and then dis-
connect the devolo Magic adapter from the
power supply.
The devolo Magic adapter has been
successfully removed from your existing
devolo Magic network.
2.2.6Network ports
You can use the network ports on the
devolo Magic adapter to connect it to stationary
devices such as computers, game consoles etc. us-
ing network cables (Cat-5e UTP, not for in-wall
use).
2.2.7Wi-Fi antennas
The internal Wi-Fi antennas are for connecting to
other network devices wirelessly.
2.2.8Integrated electrical outlet
Use the integrated electrical outlet on the
devolo Magic adapter for connecting other
general electric consumers to the household
power supply. In particular, however, electronic
devices with power supply adapters can negatively
affect PLC performance.
The integrated power supply filter in the
devolo Magic adapter filters out this sort of
external interference and reduces the impact on
PLC performance.