Installation guide

Network configuration 17

devolo dLAN 200 AV Wireless N

4 Network configuration

The dLAN 200 AV Wireless N has a built-in configura-

tion interface that can be called up using a standard

web browser. Most settings for operating the device

can be modified here. To integrate the

dLAN 200 AV Wireless N into an existing dLAN net-

work for the first time only, use the dLAN Cockpit or

the encryption button (see Chapter 5 Security in the

dLAN).

4.1 Calling up the built-in configu-

ration interface

Call up the built-in online configuration interface of the

dLAN 200 AV Wireless N using the dLAN Cockpit pro-

gram under Start  All Programs  devolo  Cockpit.

Open the Configuration page of the adapter by mov-

ing the mouse pointer over the tab of the

dLAN200AVWirelessN.

Then the program determines the current IP address

and starts the configuration in the web browser.

By default, you will come directly to the con-

figuration interface. However, if a login pass-

word was set up via the option Device

configuration  Security, you have to enter it

first. Read more about this under 4.4.1 Secu-

rity.

4.2 Menu description

Thanks to the logical menu structure, the configuration

interface is user-friendly and intuitive to operate. All

menu functions are described in the corresponding in-

terface as well as in the associated chapter in the man-

ual. The sequence of the description in the manual

follows the structure of the menu.

Click Save to save the settings of the respective area of

the configuration interface. Click Back to leave the re-

spective area of the configuration interface.