Manualshelf

Technical data

ManualsBrandsDevolo ManualsComputer equipmentdLAN 200 AVpro
12345678910
Introduction
|
|
devolo dLAN 200 AVpro i
|
8
Application examples of possible networks can be found in chapter 'All about
the network'.
Simple installation
Connect the dLAN 200 AVpro i to the computer or the network device using
the Ethernet cable provided.
Connect the dLAN 200 AVpro i to the power supply grid using the power
adapter cable provided.
In order to use the power supply grid as the transmission medium:
Set the switch to "Hybrid".
To use the coaxial network as the transmission medium:
Connect the dLAN 200 AVpro i to the coaxial connector with the coaxial
cable provided for this purpose. Set the switch to "Coax".
Install the dLAN 200 AV software for assigning a password.
That's it!
Connections and status displays
The dLAN 200 AVpro i is equipped with an Ethernet port for connection to a
network device and with a coaxial port for connection to a coaxial socket.
The 5 control lamps (LEDs) of your dLAN 200 AVpro i display the connection
status and provide status regarding the function of the data transmission.