Home Control Smoke Detector first steps
Thank you for placing your trust in this devolo product. Carefully read all instructions before setting up the device and store the instructions for later reference. Icons Very important note. Failure to observe this note may result in damage. Important note that should be observed. Background information and configuration tips for your device. Intended use Use the Home Control Smoke Detector as described in these instructions and in the Home Control online help to prevent damage and injuries.
devolo Home Control Home Control (also known as home automation) refers to the specific control of electrically operated indoor household devices. The Home Control system by devolo uses the Z-WaveTM wireless standard. A Home Control system requires a Z-WaveTM-compatible control unit such as the Home Control Central Unit from devolo. Use its Home Control portal to coordinate the Home Control Smoke Detector and all other Home Control devices.
The Home Control Smoke Detector The Home Control Smoke Detector alerts you acoustically with an audible signal, visually via an LED light, via text message, e-mail or an app. Thanks to the mobile and simultaneous notification sent to multiple mobile phone numbers and e-mail addresses that you select, you can respond immediately even when on the go.
Safety notes Fasten the Home Control Smoke Detector on the ceiling in the centre of the room or at least 50 cm away from walls, ceiling joists or fixtures. Fasten the Home Control Smoke Detector as horizontally as possible (inclination angle no more than 20° if there is roof slope). Pockets of hot air can form in the ceiling ridge in rooms with ceiling slope > 20°. In this case, fasten the Home Control Smoke Detector at least 50 cm and no more than 1 m below a roof/ceiling ridge.
Do not use a burning cigarette to test whether the Home Control Smoke Detector is functioning properly! Cigarette smoke clogs the ventilation slots and smoke inlets, making the device incapable of working properly. Using the test button, regularly check (approx. 1x per month) whether the Home Control Smoke Detector is functioning properly (see section Test alarm on page 10). Smoke detectors must be replaced every 10 years! Batteries Always keep batteries away from open flame and high temperatures.
Installing the Home Control Smoke Detector Only use the Home Control Door/Window Contact indoors. 햲 Turn the detector anti-clockwise to unscrew it from the housing backplate and access the battery com- partment.
If you are using screws to install it on a ceiling, make sure that no gas, water or power lines in the room's ceiling get damaged. There is a danger of electric shock! 햳 Based on the drilling specifications on the housing backplate, drill holes into the room's ceiling at the desired location and attach the housing backplate using screws. The disassembly alarm must be pressed in when the Home Control Smoke Detector is mounted.
Registering the Home Control Smoke Detector on the control unit (e.g. Home Control Central Unit) 햸 When you plug in the Home Control Central Unit from devolo, follow the description in the section devolo Home Control on page 3 to call up your Home Control Central Unit and select Devices Add device devolo Home Control Smoke Detector. Follow the instructions there to log into your Home Control Central Unit.
Service and warranty Warranty: 3 years If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.com/warranty. Great Britain 0203 024 18 38 (national rate) support@devolo.co.uk Sweden 0077 1400 480 (national rate) support@devolo.
40962/0115 devolo AG Charlottenburger Allee 60 52068 Aachen – Germany www.devolo.
