Specifications

devolo MicroLink dLAN software
|
|
devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router
|
30
EN
햳 Confirm with Next. The MicroLink dLAN Configuration Wizard starts the
network analysis and searches your network for the dLAN adapters.
Make sure that all of the dLAN adapters that you want to add to your network
are also connected to the power supply grid.
햴 The dLAN adapter that is directly connected to your computer is detected
automatically. All other dLAN adapters must be registered manually. To
do so, enter in sequence the security IDs of the dLAN adapters which,
together, you want to make form a network.
햵 Then, click Add and confirm with Next after you have entered all the
dLAN adapters you want to add.
햶 In the next dialog window, enter the network password you have chosen
twice and confirm with Next.
The password set up initially by devolo is HomePlug.
햷 Your network password is now assigned to the dLAN adapters you have
selected for the network.
햸 Finish the process of protecting your network by clicking Finish. Your
dLAN network is now protected from unauthorized access from outside.
You can change and/or update the configuration of the dLAN network at any
time. To do so, repeat the configuration process described above.