Product Overview

ManualsBrandsDewalt ManualsAdhesive Inserts3/8" x 6" Stainless Steel Screen Tube (Box of 25)

Adhesives

NCHORS & FASTENERS

ORDERING INFORMATION

AC100+ Gold Cartridges

Cat No. Description Std. Pack Std. Carton Pallet

8478SD AC100+ Gold 9.5 fl. oz. Quik-Shot 12 36 648

8486SD AC100+ Gold 11.5 fl. oz. dual cartridge - 12 540

8490SD AC100+ Gold 28 fl. oz. dual cartridge - 8 240

One AC100+ Gold mixing nozzle is packaged with each cartridge.

AC100+ Gold mixing nozzles must be used to ensure complete and proper mixing of the adhesive.

Cartridge System Mixing Nozzles

Cat No. Description Std. Pack Std. Carton

08293 Extra mixing nozzle for AC100+ Gold (10 oz. & 12 oz.) 2 24

08294 Extra mixing nozzle (with an 8" extension) for AC100+ Gold 28 oz. 2 24

08281 Mixing nozzle extension, 8" minimum 2 24

08297 Mixing nozzle extension, 20" long

Dispensing Tools for Injection Adhesive

Cat No. Description Std. Pack Std. Ctn.

08437 Manual caulking gun for Quik-Shot 1 12

08479

High performance caulking

gun for Quik-Shot

1 6

08485

AC100+ Gold high performance

manual tool

1 20

08494

AC100+ Gold 28 oz. standard

all metal manual tool

1 -

08496 AC100+ Gold 28 oz. pneumatic tool 1 -

DCE595D1

AC100+ Gold 28 oz. 20v battery

powered dispensing tool

1 -

Piston Plugs for Adhesive Anchors

Cat. No. Description Drill Bit Dia. Std. Pack Std. Ctn.

08304 5/8" Plug 5/8" 10 100

08258 11/16" Plug 11/16" 10 100

08259 3/4" Plug 3/4" 10 100

08300 7/8" Plug 7/8" 10 100

08301 1" Plug 1" 10 100

08303 1-1/8" Plug 1-1/8" 10 100

08305 1-3/8" Plug 1-3/8" 10 100

08307 1-1/4" Plug 1-1/4" 10 100

08309 1-1/2" Plug 1-1/2" 10 100

A plastic extension tube (Cat# 08281 or 08297) or equivalent approved by DEWALT must be

used with piston plugs.

Hole Cleaning Tools and Accessories

Cat No. Description Std. Pack

08284 Wire brush for 7/16" or 1/2" ANSI hole, 6-3/4" length 1

08285 Wire brush for 9/16" ANSI hole, 6-3/4" length 1

08275 Wire brush for 5/8" ANSI hole, 6-3/4" length 1

08286 Wire brush for 11/16" ANSI hole, 7-7/8" length 1

08278 Wire brush for 3/4" ANSI hole, 7-7/8" length 1

08287 Wire brush for 7/8" ANSI hole, 7-7/8" length 1

08288 Wire brush for 1" ANSI hole, 11-7/8" length 1

08289 Wire brush for 1-1/8" ANSI hole, 11-7/8" length 1

08276 Wire brush for 1-1/4" ANSI hole, 11-7/8" length 1

08290 Wire brush for 1-3/8" ANSI hole, 11-7/8" length 1

08291 Wire brush for 1-1/2" ANSI hole, 11-7/8" length 1

08283 SDS-plus adapter for steel brushes 1

08296

Standard drill adapter for steel brushes

(e.g. Jacobs Chuck)

08282 Steel brush extension, 12" length 1

08280 Hand pump/dust blower (25 ft. oz. clylinder volume) 1

08292 Air compressor nozzle with extension, 18" length 1

52073

Adhesive cleaning kit, includes 4 wire brushes

(08284, 08285, 08286, 08287), steel brush

extension (08282), SDS-plus adapter (08283),

standard drill adapter (08296), hand pump/dust

blower (08280), gloves and safety glasses

Stainless Steel Screen Tubes

Cat. No. Description Drill Bit Dia. Std. Pack

07960 1/4" x 2" Screen Tube 3/8" 25

07862 1/4" x 6" Screen Tube* 3/8" 25

07864 1/4" x 8"Screen Tube* 3/8" 25

07856 3/8" x 2" Screen Tube 1/2" 25

07961 3/8" x 3-1/2" Screen Tube 1/2" 25

07962 3/8" x 6" Screen Tube* 1/2" 25

07963 3/8" x 8" Screen Tube* 1/2" 25

07964 3/8" x 10" Screen Tube* 1/2" 25

07857 1/2" x 2" Screen Tube 5/8" 25

07965 1/2" x 3-1/2" Screen Tube 5/8" 25

07966 1/2" x 6" Screen Tube* 5/8" 25

07967 1/2" x 8" Screen Tube* 5/8" 25

07968 1/2" x 10" Screen Tube* 5/8" 25

07858 5/8" x 2" Screen Tube 3/4" 25

07969 5/8" x 4-1/2" Screen Tube 3/4" 20

07970 5/8" x 6" Screen Tube 3/4" 20

07971 5/8" x 8" Screen Tube* 3/4" 20

07972 5/8" x 10" Screen Tube* 3/4" 20

07859 3/4" x 2" Screen Tube 7/8" 25

07855 15/16" x 2" Screen Tube 1" 25

07865 15/16" x 8" Screen Tube 1" 10

07867 15/16" x 13" Screen Tube 1" 10

Screen tubes are made from a 300 series stainless steel. The nominal diameter of the screen

listed indicates the matching rod diameter (except for the 15/16" screen tubes, see next note).

15/16" screen tubes can accept 3/4" diameter threaded rods and #4, #5 or #6 reinforcing

bars for unreinforced masonry wall applications (URM). See separate installation details and

information in this section for 'Retrofit Bolt Anchors in URM Walls'.

*Includes extension tubing.