Product Overview

1
SECTION CONTENTS
TECH MANUAL – GAS FASTENING ©2021 DEWALT – REV. E
Gas FasteninG
General Information.........................1
Performance Data ............................2
Stick-E Assemblies .........................5
Ordering Information ....................... 6
TRAK-IT C5 TOOL
(SHOWN WITH DEEP TRACK)
FOR 1-1/4" PIN LENGTH
SHORT TRACK & LONG TRACK
FOR 1-1/2" PIN LENGTH
FASTENERS FOR CONCRETE
AND MASONRY
FASTENERS FOR STEEL
SPECIALTY FASTENERS
STICK-E ASSEMBLIES
SUITABLE BASE MATERIALS
• Normal-Weight Concrete
• Lightweight Concrete
• Grouted Concrete Masonry (CMU)
• Hollow Concrete Masonry (CMU)
• Steel
GENERAL INFORMATION
TRAK-IT
®
C5
Gas Fastening System
PRODUCT DESCRIPTION
The Trak-It C5 gas fastening system was developed for use in light-duty applications, including
attaching drywall track to concrete, lightweight concrete, block or steel. Also can be considered for
fastening lath to concrete or block, furring strips to concrete or block, and plywood to concrete or
block base materials. The system is designed for speed, efficiency and consistency. Operation of a
gas fastening system does not require licensing.
Stick-E assemblies are specially designed components for various fastening attachments into
concrete, concrete masonry block and steel.
GENERAL APPLICATIONS AND USES
• Attaching light gauge steel track to concrete, concrete masonry block (CMU) or steel
• Attaching plywood to concrete or concrete masonry block (CMU)
• Attaching lath to concrete, concrete masonry block (CMU) or steel
• Attaching furring strips to concrete or concrete masonry block (CMU)
• Attaching Stick-E assemblies to concrete and concrete masonry block (CMU)
FEATURES AND BENEFITS
+ No licensing requirements
+ Each fuel cell contains enough gas to install up to 800 fasteners
+ Available for use with Stick-E
™
accessories
+ Tracks are easily removed and exchanged on tool
+ Adjustable depth control on tool nose piece
+ Maintenance counter and LED indicator
+ Dust and corrosion resistant tool manifolds
+ Ergonomic handle with light trigger pull load
+ Can be used with a C5 pole tool
APPROVALS AND LISTINGS
• International Code Council, Evaluation Service (ICC-ES), ESR-3275
• Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
• Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block
and steel
GUIDE SPECIFICATIONS
CSI Divisions: 03 15 00 - Concrete Accessories, 05 05 23 - Metal Fastenings, 06 05 23 - Wood,
Plastic and Composite Fastenings, 09 22 16.23 - Fasteners. Power-driven fasteners shall be
Trak-It C5 as supplied by DEWALT / Powers, Towson, MD.
TOOL SPECIFICATIONS
Trak-It C5 Tool
Tool Body
Precision Moulded Aluminum and Plastic
Tool Length
17.25"
Tool Weight
7.9 lbs
Pin Length (Maximum)
1-1/4" for deep track; 1-1/2" for short track & long track
Pin Capacity
42 pins for deep track & long track; 22 pins for short track
Power Capacity
105 joules
Approximate Shots per Fuel Cell
800 pins
Approximate Shots per Battery Charge
5,700