Cut Sheet

ManualsBrandsDewalt ManualsAnchors3/8"x3-3/4" Power-Stud Anchor-SS Expansion

www.powers.com

GENERAL INFORMATION

Section contentS

Mechanical anchors

general inforMaTion

Power-stUd

+sd2

Wedge Expansion Anchor

ProdUct descriPtion

The Power-Stud+ SD2 anchor is a fully threaded, torque-controlled, wedge expansion anchor

which is designed for consistent performance in cracked and uncracked concrete. Suitable base

materials include normal-weight concrete, sand-lightweight concrete and concrete over steel deck.

The anchor is manufactured with a zinc plated carbon steel body and stainless steel expansion clip

for premium performance.

GenerAl APPlicAtions And Uses

•Structuralconnections,i.e.,beamandcolumnanchorage

•Utilityandsafety-relatedattachments

•Interiorapplications/lowlevelcorrosionenvironment

•Tensionzoneapplications,i.e.,cabletraysandstrut,pipesupports,resprinklers

•Seismicandwindloading

•Mediumtoheavydutypurposes

FeAtUres And BeneFits

+ Consistentperformanceinhighandlowstrengthconcrete

+ Nominaldrillbitsizeisthesameastheanchordiameter

+ Anchorcanbeinstalledthroughstandardxtureholes

+ LengthIDcodeandidentifyingmarkingstampedonheadofeachanchor

+ Anchordesignallowsforfollow-upexpansionaftersettingundertensileloading

APProvAls And listinGs

•InternationalCodeCouncil,EvaluationService(ICC-ES),ESR-2502forConcrete,

CodeCompliantwiththe2015,IBC,2015IRC,2012IBC,2012IRC,2009IBC,2009IRC,

2006IBC,and2006IRC.

•TestedinaccordancewithACI355.2andICC-ESAC193foruseinstructuralconcrete

underthedesignprovisionsofACI318(StrengthDesignmethodusingAppendixD)

•Evaluatedandqualiedbyanaccreditedindependenttestinglaboratoryforrecognitionin

crackedanduncrackedconcreteincludingseismicandwindloading(Category1anchors)

•FMGlobal(FactoryMutual)-FileNo.3033795,3/8"and1/2"diameters

Pipehangercomponentsforautomaticsprinklersystems

•UnderwritersLaboratories(ULListed)-FileNo.EX1289-Seelisting.

GUide sPeciFicAtions

CSI Divisions: 03 16 00 - Concrete Anchors, 04 05 19.16 - Masonry Anchors and

05 05 09 - Post-Installed Concrete Anchors. Expansion anchors shall be Power-Stud+ SD2 as

supplied by Powers Fasteners, Inc., Brewster, NY. Anchors shall be installed in accordance with

published instructions and the Authority Having Jurisdiction.

MaTerial sPecificaTions

Anchor component Specification

Anchor Body Medium carbon steel

Hex nut Carbon steel, ASTM A 563, Grade A

Washer

Carbon Steel, ASTM F 844; meets dimensional requirements of ANSI

B18.22.2. Type A Plain

Expansion wedge (clip) Type 316 Stainless Steel

Plating (anchor body, nut and washer)

Zinc plating according to ASTM B 633, SC1 Type III (Fe/Zn 5).

Minimum plating requirements for Mild Service Condition.

General Information ...................... 1

Material Speciﬁcations .................1

Installation Speciﬁcations ............ 2

Installation Instructions ................ 3

Performance Data .......................... 5

Ordering Information ..................10

POWER-STUD+ SD2

ASSEMBLY

Thread Version

• UNCthreadedstud

anchor MaTerials

• Zincplatedcarbonsteelbodywith

stainlesssteelexpansionclip,zinc

platedcarbonsteelnutandwasher

anchor size range (TYP.)

• 3/8"diameterthrough3/4"

diameter

suiTable base MaTerials

• Normal-weightconcrete

• Sand-lightweightconcrete

• Concreteoversteeldeck

• Grouted-lledconcretemasonry

(CMU)

Code listed

ICC-ES ESR-2502

concreTe

ThisProductAvailableIn

PowersDesignAssist

Real-TimeAnchorDesignSoftware

www.powersdesignassist.com

Summary of content (10 pages)

PAGE 1
General Information Section contents Power-Stud® +SD2 General Information.......................1 Material Specifications..................1 Installation Specifications.............2 Installation Instructions.................3 Performance Data...........................5 Ordering Information...................
PAGE 2
Installation Specifications Installation Table for Power-Stud+ SD24 Anchor Property/ Setting Information Notation Units Anchor diameter da Minimum diameter of hole clearance in fixture dh in. (mm) in. (mm) Nominal drill bit diameter dbit in.
PAGE 3
Installation Instructions Mechanical Anchors Power-Stud+ SD2 Anchor Detail dh Head Marking dh t t lanch lanch hef da Legend hef hnom da ho ho Letter Code = Length Identification Mark ‘+’ Symbol = Strength Design Compliant Anchor Number Code = Carbon Steel Body and Stainless Steel Expansion Clip dbit dbit Before After Length Identification Mark A B C D E F G H I J K L M N O P From 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6" 6-1/2" 7" 7-1/2" 8" 8-
PAGE 4
Installation Detail A: Power-Stud+ SD2 Installed in the Soffit of Concrete over Steel Deck Floor and Roof Assemblies (see dimensional profile requirements)1 STRUCTURAL SAND-LIGHTWEIGHT CONCRETE OR NORMAL WEIGHT CONCRETE OVER STEEL DECK (MINIMUM 3,000 PSI) Min. 3-1/4" 3/4" Clearance Min. Max. 3" Upper Flute (Valley) 1. Anchors may be placed in the upper flute or lower flute of the steel deck profiles in accordance with installation Detail A provided the minimum hole clearance is satisfied.
PAGE 5
Performance Data Mechanical Anchors Performance Data Code listed Tension Design Information1,2,11 ICC-ES ESR-2502 Design Characteristic Anchor category Notation Units 1,2 or 3 - Nominal Anchor Diameter (inch) 3/8 1/2 5/8 3/4 1 1 1 1 85.0 (586) 106.0 (731) 0.1619 (104.5) 13,080 (58.2) 70.0 (483) 90.0 (620) 0.2359 (153.2) 21,230 (94.4) STEEL STRENGTH IN TENSION (ACI 318-14 17.4.1 or ACI 318-11 D.5.
PAGE 6
Mechanical Anchors Performance Data Code listed Shear Design Information1,2,8 ICC-ES ESR-2502 Design Characteristic Anchor category Notation Units 1,2 or 3 - Nominal Anchor Diameter (inch) 3/8 1/2 5/8 3/4 1 1 1 1 68.0 (469) 88.0 (607) 0.2260 (104.9) 10,170 (45.2) 56.0 (386) 80.0 (551) 0.3345 (215.8) 12,610 (56.1) STEEL STRENGTH IN SHEAR (ACI 318-14 17.5.1 or ACI 318-11 D.6.
PAGE 7
Performance Data Mechanical Anchors Tension and Shear Design Data for Power-Stud+ SD2 Anchors in the Soffit of Concrete-Filled Steel Deck Assemblies1,2,7 Design Characteristics Notation Units Anchor Category 1, 2 or 3 in. (mm) Effective Embedment hef Code listed ICC-ES ESR-2502 Nominal Anchor Size (inch) 0.375 0.5 0.625 1 2.00 (51) 1 1 2.00 (51) 3.25 (83) 3.25 (83) 0.75 4.25 (108) 1 3.
PAGE 8
Performance Data Mechanical Anchors Factored Design Strength (fNn and fVn) Calculated in Accordance with ACI 318 Appendix D: 1- Tabular values are provided for illustration and are applicable for single anchors installed in normalweight concrete with minimum slab thickness, ha = hmin, and with the following conditions: - ca1 is greater than or equal to the critical edge distance, cac (table values based on ca1 = cac). - ca2 is greater than or equal to 1.5 times ca1.
PAGE 9
Performance Data Mechanical Anchors Converted Allowable Loads for Power-Stud+ SD2 in Cracked Concrete1,2 Minimum Concrete Compressive Strength Nominal Anchor Size (in.) Nominal Embed. hnom (in.) 3/8 2-3/8 1/2 5/8 3/4 f’c = 2,500 psi f’c = 3,000 psi f’c = 4,000 psi f’c = 6,000 psi f’c = 8,000 psi Tallowable,ASD Tension (lbs.) Vallowable,ASD Shear (lbs.) Tallowable,ASD Tension (lbs.) Vallowable,ASD Shear (lbs.) Tallowable,ASD Tension (lbs.) Vallowable,ASD Shear (lbs.
PAGE 10
Ordering Information Mechanical Anchors Ordering Information Power-Stud+ SD2 (Carbon Steel Body with Stainless Steel Expansion Clip) ANSI Carbide Drill Bit Cat. No. Cat. No. Anchor Size Thread Length Box Qty. Carton Qty. SDS-Plus Wt. /100 (lbs.