Cut Sheet

7
MeCHAnICAL
POWER-STUD+ SD2 • POWER-STUD HD5
uncracked concrete. Suitable base materials include normal-weight concrete,
structural sand-lightweight concrete and concrete over metal deck. The anchor is
manufactured with a zinc plated carbon steel body and expansion clip.
Patented & Additional Patents Pending
POWER-StUd+ Sd1 CARBON StEEL BOdY & EXPANSION CLIP
CAT. NO. SIZE THREAD LENGTH STD. BOX STD. CTN.
7400SD1* 1/4" x 1-3/4" 3/4" 100 600
7402SD1 1/4" x 2-1/4" 1-1/4" 100 600
7404SD1 1/4" x 3-1/4" 2-1/4" 100 600
7410SD1* 3/8" x 2-1/4" 7/8" 50 300
7412SD1* 3/8" x 2-3/4" 1-3/8" 50 300
7413SD1 3/8" x 3" 1-5/8" 50 300
7414SD1 3/8" x 3-1/2" 2-1/8" 50 300
7415SD1 3/8" x 3-3/4" 2-3/8" 50 300
7416SD1 3/8" x 5" 3-5/8" 50 300
7417SD1 3/8" x 7" 5-5/8" 50 200
7420SD1* 1/2" x 2-3/4" 1" 50 200
7422SD1 1/2" x 3-3/4" 2" 50 200
7423SD1 1/2" x 4-1/2" 2-3/4" 50 200
7424SD1 1/2" x 5-1/2" 3-3/4" 50 150
7426SD1 1/2" x 7" 5-1/4" 25 100
7427SD1 1/2" x 8-1/2" 6-3/4" 25 100
7428SD1 1/2" x 10" 8-1/4" 25 100
7430SD1* 5/8" x 3-1/2" 1-1/2" 25 100
7432SD1 5/8" x 4-1/2" 2-1/2" 25 100
7433SD1 5/8" x 5" 3" 25 100
7434SD1 5/8" x 6" 4" 25 75
7436SD1 5/8" x 7" 5" 25 75
7438SD1 5/8" x 8-1/2" 6-1/2" 25 50
7439SD1 5/8" x 10" 8" 25 50
7440SD1* 3/4" x 4-1/4" 1-3/4" 20 60
7441SD1* 3/4" x 4-3/4" 2-1/4" 20 60
7442SD1 3/4" x 5-1/2" 3" 20 60
7444SD1 3/4" x 6-1/4" 3-3/4" 20 60
7446SD1 3/4" x 7" 4-1/2" 20 20
7448SD1 3/4" x 8-1/2" 6" 10 60
7449SD1 3/4" x 10" 7-1/2" 10 40
7451SD1 3/4" x 12" 9-1/2" 10 40
7450SD1* 7/8" x 6" 2-3/4" 10 40
7452SD1 7/8" x 8" 4-3/4" 10 40
7454SD1 7/8" x 10" 6-3/4" 10 40
7461SD1* 1" x 6" 2-3/8" 10 30
7463SD1 1" x 9" 5-3/8" 10 30
7465SD1 1" x 12" 8-3/8" 5 20
7473SD1 1-1/4" x 9" 4-3/4" 5 15
7475SD1 1-1/4" x 12" 7-3/4" 5 15
* Sizes which are less than the minimum standard anchor length for strength design. The published length is
the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer
thickness when selecting a length. All anchors are packaged with nuts and washers.
Code listed
ICC-ES ESR-2502
City of los angeles
LARR-25831(Concrete)
Power-Stud+
™
SD2
Wedge Type Expansion Anchor
BASE MATERIAL
Normal-Weight Concrete, Structural Sand-Lightweight Concrete,
Concrete over Metal Deck, Grout-Filled Masonry
SIZE RANGE
3/8” through 3/4” diameter (Cracked and Uncracked Concrete)
ANCHOR MATERIAL
Zinc Plated Carbon Steel Body with Stainless Steel Expansion Clip
The Power-Stud+ SD2 anchor is a fully threaded, torque-controlled, wedge
expansion anchor which is designed for consistent performance in cracked and
uncracked concrete. Suitable base materials include normal-weight concrete,
structural sand-lightweight concrete and concrete over metal deck. The anchor is
manufactured with a zinc plated carbon steel body and stainless steel expansion
clip for premium performance.
Patented & Additional Patents Pending
POWER-StUd+ Sd2 CARBON StEEL BOdY & SS EXPANSION CLIP
CAT. NO. SIZE THREAD LENGTH STD. BOX STD. CTN.
7413SD2 3/8" x 3" 1-5/8" 50 300
7414SD2 3/8" x 3-1/2" 2-1/4" 50 300
7415SD2 3/8" x 3-3/4" 2-1/2" 50 300
7416SD2 3/8" x 5" 3-3/4" 50 300
7422SD2 1/2" x 3-3/4" 2-1/8" 50 200
423SD2 1/2" x 4-1/2" 2-7/8" 50 200
7424SD2 1/2" x 5-1/2" 3-7/8" 50 150
7426SD2 1/2" x 7" 5-3/8" 25 100
7427SD2 1/2" x 8-1/2" 6-7/8" 25 100
7435SD2 5/8" x 4-3/4" 2-7/8" 25 100
7433SD2 5/8" x 5" 3-1/8" 25 100
7434SD2 5/8" x 6" 4-1/8" 25 75
7436SD2 5/8" x 7" 5-1/8" 25 75
7438SD2 5/8" x 8-1/2" 6-5/8" 25 75
7442SD2 3/4" x 5-1/2" 3-1/4" 20 60
7444SD2 3/4" x 6-1/4" 4" 20 60
7446SD2 3/4" x 7" 4-3/4" 20 60
7448SD2 3/4" x 8-1/2" 6-1/4" 10 60
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for
the nut and washer thickness when selecting a length. All anchors are packaged with nuts and washers.
INStALLAtION ACCESSORIES FOR AddItIONAL LENGtH
CAT. NO. SIZE STD. BOX
08465 Adjustable torque wrench with 1/2” square drive (10 to 150 ft.-lbs.) 1
Power-Stud
®
HD5
Wedge Type Expansion Anchor
New!
BASE MATERIAL
Concrete, Grouted CMU
SIZE RANGE
3/8” x 3” to 3/4” x 8-1/2”
ANCHOR MATERIAL
Hot Dipped Galvanized Steel
The Power-Stud anchor is a one piece fully threaded, wedge style anchor avail-
able in carbon steel and stainless steel. The drill bit diameter needed for proper
installation is the same nominal size as the anchor diameter.
Hot Dipped Galvanized Power-Stud anchors are manufactured from carbon steel
which have a mechanically galvanized coating (zinc) in accordance with ASTM
Specification B 695, Class 65, Type I.
HOt dIPPEd GALVANIZEd POWER-StUd
CAT. NO. SIZE MIN. EMBED. THREAD LENGTH STD. BOX STD. CTN.
7720HD5 1/2" x 2-3/4" 2" 2" 50 200
7722HD5 1/2" x 3-3/4" 2" 2-7/8" 50 200
7723HD5 1/2" x 4-1/2" 2" 3-5/8" 50 200
7724HD5 1/2" x 5-1/2" 2" 6-5/8" 50 150
7726HD5 1/2" x 7" 2" 2-3/4" 25 100
7730HD5 5/8" x 3-1/2" 2-3/8" 4-3/4" 25 100
7733HD5 5/8" x 5" 2-3/8" 3" 25 100
7734HD5 5/8" x 6" 2-3/8" 4" 25 75
7738HD5 5/8" x 8-1/2" 2-3/8" 6-1/2" 25 50