Brochure

+
ESR-2582
ESR-3200
ESR-4105
Concrete/Masonry/
Unreinforced Masonry
ASTM C 881
Type I, II, IV & V
Grade 3
(Class A&B)
Certified to
NSF/ANSI 61
LOW
TEMPERATURE
DISPENSING
approved for
dispensing down
to 14˚F
ICC-ES APPROVED
approved for cracked and
uncracked concrete, grouted
or hollow masonry and
unreinforced masonry
VERSATILE
low odor
formula with
quick cure time
CERTIFIED TO
NSF/ANSI 61
drinking
water system
components
DOT
wide range
of listings;
27 states
SEISMIC
approved
for seismic
design
categories
A-F
F120
F180
Competitive Comparison,
Concrete
DEWALT
AC100+
Gold
®
Hilti
HY 100
Simpson
AT-XP
ITW
Epcon S7
Code
Approval
(Concrete)
ICC-ES
ESR-2582
(June 2016)
ICC-ES
ESR-3574
(Aug. 2016)
IAMPO
ER-263
(Sept. 2016)
ICC-ES
ESR-2308
(June 2016)
Cracked Concrete Yes Yes Yes Yes
Water-Filled Holes Yes No No Yes
Seismic Yes No Yes Yes
DOT Rebar Dowel 28 states
Multiple
States
Multiple
States
Multiple
States
Min. Install
Temperature
14˚ F 14˚ F 14˚ F 14˚ F
Min. Cure Time
@ 68˚ F
45 Min 30 Min 60 Min 30 Min
Post-Installed Rebar
Approval
Yes
No No Yes
Hilti HY 100 is a trademark of Hilti Corporation
AT-XP is a registered trademark of Simpson Strong-Tie Company Inc.
Epcon and S7 are trademarks of ITW Commercial Construction, North America.
Competitive Comparison,
Masonry
DEWALT
AC100+
Gold
®
Hilti
HY 70
Simpson
AT-XP
ITW
Epcon
S7
Code Approval
(CMU)
ICC-ES
ESR-3200
(Dec. 2016)
ICC-ES
ESR-2682
(Aug. 2016)
IAMPO
ER-281
(Mar. 2016)
-
Grout-filled CMU Yes Yes Yes No
Top of Walls Yes Yes No No
Hollow CMU (install
w screen tube)
Yes Yes No No
Min. Install
Temperature
14˚ F 14˚ F 14˚ F NA
Min. Cure Time
@ 68˚ F
45 Minutes 1.5 Hours 60 Minutes NA
*CMU = concrete masonry
Hilti HY 70 is a trademark of Hilti Corporation
AT-XP is a registered trademark of Simpson Strong-Tie Company Inc.
Epcon and S7 are trademarks of ITW Commercial Construction, North America.
Normal Weight
Concrete
Light Weight
Concrete
Grouted Block Hollow Block Brick Unreinforced
Masonry
A
NCHORS & FASTENERS
10