Safety Data Sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
DEWALT Industrial Tool Co.
AC100+ Gold, Comp. B
Revision date: 19.03.2020 Page 6 of 8
Based on available data, the classification criteria are not met.
Specific target organ toxicity (STOT) - repeated exposure
Carcinogenicity (OSHA): No ingredient of this mixture is listed.
Silica dust, crystalline, in the form of quartz or cristobalite (CAS 14808-60-7) is
listed in group 1. Benzoyl peroxide (CAS 94-36-0) is listed in group 3.
Carcinogenicity (IARC):
No ingredient of this mixture is listed.Carcinogenicity (NTP):
Aspiration hazard
Based on available data, the classification criteria are not met.
12. Ecological information
Ecotoxicity
The product is not: Ecotoxic.
OECD 201 (Desmodesmus subspicatus )
IC10: (0 - 72 h) = 30 mg/l
IC50: (0 - 72 h) = 150 mg/l
OECD 202 (Daphnia magna)
EC0/NOEC (48h) = 100 mg/l
EC50 (48h) = >500 mg/l
EC100 (48h) = >>500 mg/l
OECD 203 (Danio rerio)
LC0/NOEC : 250 mg/l
LC50 : > 500 mg/l
LC100 : >> 500 mg/l
Persistence and degradability
The product has not been tested.
Bioaccumulative potential
The product has not been tested.
The product has not been tested.
Mobility in soil
No information available.
Other adverse effects
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
Further information
13. Disposal considerations
Waste treatment methods
Advice on disposal
Dispose of waste according to applicable legislation. Do not allow to enter into surface water or drains. Do not
allow to enter into soil/subsoil.
14. Transport information
US DOT 49 CFR 172.101
Not a hazardous material with respect to these transport regulations.
Proper shipping name :
Marine transport (IMDG)
UN number :
No dangerous good in sense of this transport regulation.
No dangerous good in sense of this transport regulation.
UN proper shipping name :
Print date: 19.03.
2020
Revision No: 1,13 - Replaces version: 1,12 USA - EN