SPEAKER SYSTEM User Manual

English
Getting Started Page 11
Dock adapters are provided by Apple
with their recent iPod models.
Compatible iPod or iPhone models will
be charged when connected.
Connecting an Auxiliary Device
If you have an audio device with a 3.5mm
headphone out or line-out jack, you can play it
through the speakers of the CSMP145.
To connect your auxiliary audio device:
Connect one end of a 3.5mm auxiliary cable 1.
to the headphone out/line-out jack of the
audio device.
Connect the other end of the cable to AUX 2.
IN connector located on the rear of the
CSMP145.
Basic Controls
To do this… …do this.
Turn the unit on or off Press [POWER]
Change between iPod/iPhone and
AUX playback mode
Press [AUX/iPod]
Adjust the volume level Press [VOL +] or
[VOL –]
Start, pause, or resume iPod/
iPhone playback
Press [Play/Pause]
When the unit is in iPod mode, you
may use the controls of your iPod/
iPhone directly.