Instruction manual
7
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on
the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure. Direct particles away from
face and body.
WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS wear certified
safety equipment:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection.
WARNING: ALWAYS wear proper personal hearing protection that conforms to
ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise
from this product may contribute to hearing loss.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ................. volts A ...............amperes
Hz ............... hertz W ..............watts
min ............. minutes ...........alternating current
.......... direct current
n
o ..............no load speed
..............Class I Construction .............earthing terminal
................... (grounded) .............safety alert symbol
...............Class II Construction …/min .......revolutions per minute
................... (double insulated) BPM ..........beats per minute
Package contents
1 Circular Saw (with 185 mm blade fitted)
1 Parallel fence
1 Saw blade wrench
1 Instruction manual
1 Exploded drawing
Description (Fig. 1, 2)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
INTENDED USE
The D23620-XE circular saw is designed for professional sawing of wood and plastic.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This heavy-duty plunge saw is a professional power tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced operators use
this tool.
A. On/off switch
A
C
D
E
F
G
H
I
J
K
FIG. 1
B. Lock-off button
C. Spindle lock
D. Dust extraction outlet
E. Shoe
F. Lower guard
retracting lever
G. Lower blade guard
H. Saw blade
I. Bevel adjustment
knob
J. Mark for bevel cut
K. Mark for straight cut
L. Depth adjustment
knob (Fig. 2)
M. Parallel fence (Fig. 2)