® D25002 D25003 1
ENGLISH HEAVY DUTY ROTARY HAMMER DRILL D25002/D25003 Congratulations! EC-Declaration of conformity You have chosen a DEWALT Power Tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional Power Tool users. Technical data Voltage V (U.K.
ENGLISH Safety instructions When using Power Tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place! General 1 Keep work area clean Cluttered areas and benches can cause accidents. 2 Consider work area environment Do not expose Power Tools to humidity. Keep work area well lit.
ENGLISH Check for misalignment and seizure of moving parts, breakage of parts and any other conditions that may affect its operation. Have damaged guards or other defective parts repaired or replaced as instructed. Do not use the tool if the switch is defective. Have the switch replaced by an authorized DEWALT repair agent. 20 Have your tool repaired by an authorized DEWALT repair agent This Power Tool is in accordance with the relevant safety regulations.
ENGLISH Never use a light socket. Never connect the live (L) or neutral (N) wires to the earth pin marked E or . For 115 V units with a power rating exceeding 1500 W, we recommend to fit a plug to BS4343 standard. Hammer drilling: simultaneous rotating and impacting for concrete and masonry drilling D25003 - Selecting the operating mode (fig.
ENGLISH • Loosen the side handle. • For RH-users, slide the side handle clamp over the collar behind the tool holder, handle at the left. • For LH-users, slide the side handle clamp over the collar behind the tool holder, handle at the right. • Rotate the side handle to the desired position and tighten the handle. Setting the drilling depth (fig. E) • Insert the required drill bit. • Slacken the side handle (5). • Fit the depth adjustment rod (6) through the hole in the side handle clamp.
ENGLISH Screwdriving (fig. A) • Select the rotary drilling mode (4). • Select the direction of rotation (3). • Insert the special SDS-plus® screwdriving adaptor for use with hexagonal screwdriver bits. • Insert the appropriate screwdriver bit into the adaptor. When driving slotted head screws always use bits with a finder sleeve. • Gently press the variable speed switch (1) to prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal.
ENGLISH GUARANTEE • 30 DAY NO RISK SATISFACTION GUARANTEE • If you are not completely satisfied with the performance of your DEWALT tool, simply return it within 30 days, complete as purchased, to a participating Dealer, or an authorized DEWALT repair agent, for a full refund or exchange. Proof of purchase must be produced.