D25052
English (original instructions) 3 Copyright DEWALT B
Figure 1 b a f e h d c Figure 2 g Figure 3 D25052KT j i 1
Figure 4 Figure 5 f g Figure 6 h d c Figure 7 b c 2
ENGLISH SUB-COMPACT HAMMER D25052 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage (U.K.
ENGLISH Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Fuses: Europe U.K. & Ireland 230 V tools 230 V tools 10 Amperes, mains 13 Amperes, in plugs Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
ENGLISH d) e) f) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
ENGLISH • • • • • • • • • • 6 where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Wear safety goggles or other eye protection.
ENGLISH Description (fig. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. a. Variable speed trigger switch Mains Plug Replacement (U.K. & Ireland Only) If a new mains plug needs to be fitted: • Safely dispose of the old plug. b. Main handle • Connect the brown lead to the live terminal in the plug. c. Side handle • Connect the blue lead to the neutral terminal. d. Depth rod e. SDS Plus chuck f. Mode selection collar g. Reversing lever h.
ENGLISH TO CHANGE SIDES For right-hand users: slide the side handle clamp over the chuck, handle at the left. For left-hand users: slide the side handle clamp over the chuck, handle at the right. SIDE HANDLE WORK LIGHT (D25052KT ONLY) (FIG. 3) Your side handle has a work light. The light is battery powered and operated by using the on/off button (i). To replace the worklight's batteries (CR2032 x 2): 1. Remove battery door screw (j) as shown in fig. 3. 2.
ENGLISH Overload Clutch If the drill bit becomes jammed or caught, the drive to the drill spindle is interrupted by the overload clutch. Because of the forces that occur as a result, always hold the machine securely with both hands and take a firm stance. Drilling Tools The machine is intended for hammerdrilling in concrete, brick and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Drilling (fig.
ENGLISH Hammerdrill Operation 1. When drilling, use just enough force on the hammer to keep it from bouncing excessively or “rising” off the bit. Too much force will cause slower drilling speeds, overheating, and a lower drilling rate. 2. Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed. 3.
ENGLISH GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
12
13
Belgique et DEWALT - Belgium BVBA Luxembourg België Egide Walschaertsstraat 16 en Luxemburg 2800 Mechelen Tel: NL Tel: FR Fax: Danmark DEWALT Roskildevej 22 2620 Albertslund Tel: 70 20 15 11 Fax: 70 22 49 10 www.dewalt.dk kundeservice.dk@sbdinc.com Deutschland DEWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de infobfge@sbdinc.com Ελλάς DEWALT (Ελλάς) Α.Ε. Τηλ: 00302108981616 EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7 Φαξ: 00302108983570 & Λ.