User Manual

ENGLISH
31
e) Maintain power tools. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the working
conditions and the work to be performed. Use of
the power tool for operations different from those
intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the safety of the
power tool is maintained.
Additional Safety Instructions for Rotary
Hammers
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Use auxiliary handle (s), if supplied with the tool. Loss of
control can cause personalinjury.
• Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
Residual Risks
The following risks are inherent to the use of rotary and chipping
hammers:
- Injuries caused by touching the rotating parts or hot parts of
the tool
In spite of the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These are:
- Impairment of hearing.
- Risk of squeezing fingers when changing the accessory.
- Health hazards caused by breathing dust developed
when working in concrete and / or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before
use.
Wear ear protection.
Wear eye protection.
Clutch Setting 40 Nm is designed for most
drilling applications.
Clutch Setting 80 Nm is designed for higher
torque applications.
Red service indicator LED. For detailed description
see under Service Indicator LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator LED's.
DATE CODE POSITION (FIG. 1)
The Date Code (w), which also includes the year of manufacture,
is printed into the housing. Example:
2014 XX XX Year of
Manufacture
PackageContents
The package contains: 1
Rotary hammer
(D25721, D25722, D25723, D25761, D25762, D25763) or
1 Chipping Hammer (D25871) 1 Side
handle 1 Kitbox (K-models only) 1
Pointed chisel (only D25871) 1
Instruction manual 1 Exploded drawing
• Check for damage to the tool, parts or accessories which
may have occurred during transport.