Operation Manual

19
ENGLISH
ANGLE GRINDER D28127/D28128/D28129/
D28151(K)/D28152/D28153/D28154(K)/
D28155(K)/D28156/D28157/D28187
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical data
D28127 D28128 D28129 D28151 D28152 D28153
Voltage V 230 230 230 230 230 230
(U.K. & Ireland only) V 230/115
Power input W 800 900 850 900 1,000 1,100
No-load speed min
-1
10,000 10,000 10,000 10,000 10,000 10,000
Wheel diameter mm 115 115 115 125 125 125
Spindle diameter M14 M14 M14 M14 M14 M14
Weight kg 1.7 1.7 1.7 1.7 1.7 1.7
D28154 D28155 D28156 D28157 D28187
Voltage V 230 230 230 230 230
(U.K. & Ireland only) V 230/115
Power input W 1,200 1,400 1,400 1,250 1,200
No-load speed min
-1
10,000 10,000 2,800-10,000 10,000 9,300
Wheel diameter mm 125 125 125 125 150
Spindle diameter M14 M14 M14 M14 M14
Weight kg 1.8 1.8 1.8 1.7 2.0
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
D28127/D28128/D28129/D28151(K)/D28152/
D28153/D28154(K)/D28155(K)/D28156/D28157/
D28187
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144: