D28410-XE D28411-XE D28414-XE D28432C-XE 1
3 1 4 A 2 5 Copyright DEWALT
4 7 9 6 10 11 8 C1 B 14 14 12 12 10 11 10 A 13 14 11 12 10 11 3 B C2 C3 3
17 15 5 15 16 17 5 D2 D1 19 18 E1 4 E2
ENGLISH ANGLE GRINDER D28410/D28411/D28414/D28432C Congratulations! EC-Declaration of conformity You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical data Voltage Power input No-load speed Wheel diameter Spindle Weight Voltage Power input No-load speed Wheel diameter Spindle Weight Fuses: Europe U.K.
ENGLISH Safety instructions When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read all of this manual carefully before operating the tool. Save this manual for future reference. General 1 Keep work area clean Cluttered areas and benches can cause accidents. 2 Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions.
ENGLISH 16 Avoid unintentional starting Do not carry the tool with a finger on the switch. Be sure that the tool is switched off before plugging in. 17 Do not abuse cord Never carry the tool by its cord. Never pull the cord to disconnect from the socket. Keep the cord away from heat, oil and sharp edges. 18 Store idle tools When not in use, tools must be stored in a dry place and locked up securely, out of reach of children.
ENGLISH Wear ear protection Package contents The package contains: 1 Angle grinder 1 Guard 1 Side handle 1 Flange set 1 Two-pin spanner 1 Instruction manual 1 Exploded drawing • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. • Disconnect the plug from the supply.
ENGLISH Always ensure that the cable clamp is correctly and securely fitted to the sheath of the cable. Using an extension cable If an extension cable is required, use an approved extension cable suitable for the power input of this tool (see technical data). The minimum conductor size is 1.5 mm2. When using a cable reel, always unwind the cable completely. Also refer to the following table. Conductor size (mm2) 0.75 1.00 1.50 2.50 4.00 Voltage 115 230 Amperes 0 - 2.0 2.1 - 3.4 3.5 - 5.0 5.1 - 7.0 7.
ENGLISH • Pull the spring-loaded tab (18) to unlock the rotary mechanism (fig. E1). Hold the tab in the pulled-out position. • Rotate the handle (19) into the desired position (fig. E2). • Release the tab and lock it in position. • Check that the rotary mechanism is locked. Do not switch the tool on or off when under load. Consult your dealer for further information on the appropriate accessories. Maintenance Do not use the tool unless the rotary handle is in the locked postion.
ENGLISH GUARANTEE THREE YEAR LIMITED WARRANTY DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. Please return the complete unit, transportation prepaid, to any DEWALT Service Centre, or any authorised service station. For warranty repair information, call (AUS) 1800 654 155 or (NZ) 02 259 1111. This warranty does not apply to: • Accessories. • Damage caused where repairs have beenmade or attempted by others.
Australia Black & Decker (Australia) Pty. Ltd.