Manual

MULTIPLESIDEHANDLEPOSITIONS
Thesidehandlecanbeproperlypositionedinfivelocationsbased
onpersonalpreferenceandapplication.Thesidehandlemustbe
usedatalltimestomaintainpropercontrolofthetool.
RUBBERBUMPER
Thegearcaserubberbumpermaywearwith
use.Thebumpercanbereplacedwithpart
number397711-00availableat extracost
fromDEWALTauthorizedservicecenters.
Replacementshouldbe performedby
DEWALTauthorizedservicecentersor
qualifiedservicepersonnel.
SPINDLELOCK C
Thespindlelockpinisprovidedtopreventthe
spindlefromrotatingwheninstallingorremoving
wheels.Operatethespindlelockpinonlywhen
thetoolisturnedoffandunpluggedfromthe
powersource.Toengagethelock,depressthe
spindlelockbutton(C)androtatethespindle
untilyouareunabletorotateitfurther.
z_CAUTION: Never depress the spindle lock button while the grinder
is running. Never turn on the grinder while the spindle lock button is
depressed. Damage to your tool or personal injury may result.
SOFT MOUNT
The grinder is equipped with a soft mount, enabling easy wheel
installation and removal.
Accessories and Attachments
It is important to choose the correct guards, backing pads and
flanges to use with grinder accessories. See the chart on pages
5-7 for information on choosing the correct accessories.
Sanding Flap Discs
soR mount
Type 27 guard
D284937/D284939
hubbed sanding flap
disc
soft mount
Type 27 guard
D284937/D284939
backing flange
54339-00
non-hubbed sanding
flap disc
clamp nut
22191-00
NOTE: Wheel size must match guard size; i.e., a new 7" wheel may
not be used with a 9" guard. The bottom surface of wheel must be
inside the bend of the guard lip.