Use and Care Manual

9
ENGLISH
Three Year Limited Warranty
DeWALT
will repair or replace, without charge, any defects due to faulty materials or
workmanship for three years from the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty
repair information, visit www.dewalt.com or call 1-800-4-
DeWALT
(1-800-433-9258). This
warranty does not apply to accessories or damage caused where repairs have been made or
attempted by others. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
AND EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damages, so these limitations may not apply to you. This warranty gives you
specific legal rights and you may have other rights which vary in certain states orprovinces.
In addition to the warranty,
DeWALT
tools are covered byour:
1 YEAR FREE SERVICE
DeWALT
will maintain the tool and replace worn parts caused by normal use, for free, any time
during the first year afterpurchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
DeWALT
Power Tool or Nailer
for any reason, you can return it within 90 days from the date of purchase with a receipt for a
full refund – no questionsasked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products
sold in Latin America, see country specific warranty information contained in the packaging,
call the local company or see website for warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-4-
DeWALT
(1-800-433-9258) for a freereplacement.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help you obtain more efficient
warranty service in case there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft,
your registration of ownership will serve as your proof ofpurchase.
• FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely
event a safety notification is required under the Federal Consumer SafetyAct.
• Register online at www.dewalt.com
Repairs

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including power cord repairs, and brush inspection and replacement,
when applicable) should be performed by a
DeWALT
factory service center or a
DeWALT
authorized service center. Always use identical replacementparts.
Troubleshooting Guide
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR
PERSISTENT PROBLEMS, CONTACT A
DeWALT
SERVICE CENTER OR CALL 1-(800)-4-
DeWALT
.
Trouble! What’s Wrong? What To Do
Saw will not start Saw not plugged in. Plug in saw.
GFCI tripped. Push switch to off and push reset button on GFCI.
Saw will not run (plugged in; switch on). Push switch to off and push the reset button on the GFCI.
Fuse blown or circuit breaker tripped. Push switch to off and replace fuse or reset circuit breaker.
Cord damaged. Have cord replaced by authorized service center.
Brushes worn out. Have brushes replaced by authorized service center.
Saw makes unsatisfactory cuts Dull cutting wheel. Replace cutting wheel. Refer to Installing the Cutting Wheel.
Water pump will not pump water. Remove water pump and spray with clean water to dislodge the impeller.
Cutting wheel mounted backwards. Turn cutting wheel around. Refer to Installing the Cutting Wheel.
Build up on cutting wheel. Use dressing stone to remove build up.
Incorrect cutting wheel for work being done. Change the cutting wheel. Refer to Installing the Cutting Wheel.
Cutting wheel does not come up to speed Extension cord too small of a wire gauge or too long. Replace with adequate size cord. Refer to Minimum Gauge for Cord Sets.
Arbor loose. Tighten arbor.
Low house voltage. Contact your electric company.
Machine vibrates excessively Saw not mounted securely to stand. Reposition water pan on stand.
Stand or bench on uneven floor. Reposition on flat level surface.
Damaged saw cutting wheel. Replace cutting wheel. Refer to Installing the Cutting Wheel.
Does not make accurate cuts Cutting cart side attachment not secure to fence. Check and adjust. Tighten the side attachment knob.
Cutting wheel is not square to fence. Check and adjust. Refer to Cutting Wheel Parallel to Cart.
Cutting wheel is not perpendicular to cart surface. Check and adjust fence. Refer to Cutting Wheel Square to Cart.
Workpiece moving. Use side attachment and edge guide.

CAUTION: The use of any other accessory not recommended for use with this tool could
behazardous.