Operation Manual

ENGLISH
28
– Risk of injury caused by pinch points,
sharp edges and improper handling of
workpiece.
– Risk of injury caused by sharp edges
when changing nails or inserting nail
sticks.
– Discomfort to hand and arms. Vibration
caused by the operating action of this tool
may cause permanent injury to fingers,
hands, and arms. Use gloves to provide
extra cushion, take frequent rest periods,
and limit daily time of use.
Markings on Tool
The following pictograms are shown on the tool:
Pneumatic tool with safety yoke.
Do not use on scaffoldings and ladders
Read instruction manual
before use.
Wear safety glasses.
Wear ear protection.
Compatible nail angles (D51825).
Compatible nail angles (D51850).
Maximum number of nails in magazine
(D51825).
Maximum number of nails in magazine
(D51850).
Nail diameter (D51825).
Nail diameter (D51850).
Nail length.
Max. operating pressure.
Nail type: clipped head (D51825).
Nail type: full round head (D51850).
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing surface
above the trigger switch.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 nailer
1 sequential action trigger
1 instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. trigger switch
b. exhaust
c. depth setting
d. contact trip
e. magazine
f. rafter hook
g. air fitting
h. pusher