Instruction manual

English
9
3. Drain tanks.
4. Allow the compressor to cool down before starting service.
NOTE: All compressed air systems contain maintenance parts
(e.g., filters, separators) which are periodically replaced. These
used parts may be, or may contain, substances that are regulated
and must be disposed of in accordance with local, state, and feder-
al laws and regulations.
NOTE: Take note of the positions and locations of parts during dis-
assembly to make reassembly easier.
NOTE: Any service operations not included in this section should
be performed by authorized service personnel.
Maintenance Chart
Procedure Day Week
Drain condensation in air tank(s) X
Check for unusual noise/vibration X
Check for air leaks* X
Check safety relief valve X
Inspect air filter (if necessary) X
Clean exterior of compressor X
*To check for air leaks, apply a solution of soapy water around
joints. While the compressor is reaching the pressure cut-out limit
and after the pump cuts out, look for air bubbles around the joints.
Repairs
No user serviceable parts in this tool. To assure product SAFETY
and RELIABILITY, repairs, maintenance and adjustment should be
performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Accessories
Recommended accessories for use with your tool are available for
purchase from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, contact:
D
EWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
21286 or call 1-800-4-D
EWALT.
CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
SERVICE
Please have the following information available for all service calls:
Model Number ______________________________________
Serial Number ______________________________________
Date and Place of Purchase ____________________________
The manufacturer reserves the right to make changes in price,
color, materials, equipment specifications or models at any time
without notice.
Full One Year Warranty
DEWALT heavy duty air compressors are warranted for one year
from date of purchase. We will repair, without charge, any defects
due to faulty materials or workmanship. For warranty repair infor-
mation, call 1-800-4-D
EWALT. This warranty does not apply to
accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights
and you may have other rights which vary in certain states or
provinces.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
EWALT for a free
replacement.