Operation Manual

english
32
• Turn unit off and disconnect battery pack
before installing and removing accessories,
before adjusting or when making repairs.
An accidental start-up can cause injury.
• Useonlyaccessoriesthatare
recommended by the manufacturer for
your model. Accessories that may be suitable
for one tool may be hazardous when used on
another tool. The use of improper accessories
may cause risk of injury to persons.
• Lock trigger in the OFF position when not
in use to avoid inadvertent release of material.
• Takecarenottogetcaulkoradhesiveon
battery contact points.
• Always read and follow all manufacturers
instructions regarding caulk or adhesive.
Failure to do so may result in personal injury.
DANGER: Keep hands out of the plunger
and plunger rod area.
WARNING:Do not use the tool on a
ladder.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
Risk of pinching or crushing fingers.
Risk of inhaling fumes when working with
adhesives.
Markings on Tool
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery!
Example:
2008 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVETHESEINSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DE9116/DE9135 battery chargers.
• Beforeusingcharger,readallinstructionsand
cautionary markings on charger, battery pack,
and product using battery pack.
DANGER: Electrocution hazard.
230 volts are present at charging
terminals. Do not probe with conductive
objects. Electric shock or electrocution
may result.
WARNING:Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION:Burn hazard. To reduce
the risk of injury, charge only DeWALT
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
CAUTION:Under certain conditions,
with the charger plugged in to the
power supply, the exposed charging
contacts inside the charger can be
shorted by foreign material. Foreign
materials of a conductive nature such
as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic
particles should be kept away from
charger cavities. Always unplug the
charger from the power supply when
there is no battery pack in the cavity.
Unplug charger before attempting to
clean.
• DONOTattempttochargethebatterypack
withanychargersotherthantheonesin
this manual. The charger and battery pack are
specifically designed to work together.
• Thesechargersarenotintendedfor
any uses other than charging DeWA LT
rechargeable batteries. Any other uses
may result in risk of fire, electric shock or
electrocution.
• Donotexposechargertorainorsnow.
• Pullbyplugratherthancordwhen
disconnecting charger. This will reduce risk
of damage to electric plug and cord.
• Makesurethatcordislocatedsothatit
willnotbesteppedon,trippedover,or
otherwisesubjectedtodamageorstress.
• Donotuseanextensioncordunlessit
is absolutely necessary. Use of improper
extension cord could result in risk of fire,
electric shock, or electrocution.
• Donotplaceanyobjectontopofcharger
or place the charger on a soft surface that
might block the ventilation slots and result
in excessive internal heat. Place the charger
in a position away from any heat source. The
charger is ventilated through slots in the top and
the bottom of the housing.