Operation Manual

26
ENGLISH
CORDLESS IMPACT WRENCH DC800/DC810
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Battery pack DE9360 DE9280
Battery type Li-Ion Li-Ion
Voltage V
DC
36 28
Capacity Ah 2.2 2.2
Weight kg 1.0 0.92
Charger DE9000
Mains voltage V
AC
230
Battery type Li-Ion
Approx. charging time min 60
(2.0 Ah battery packs)
Weight kg 0.9
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make D
EWALT one of the most reliable
partners for professional power tool users.
Technical Data
DC800 DC810
Voltage V
DC
36 28
Type 1 1
Max. power output W 800 350
No-load speed min
-1
1,400 0-2,400
Beats min
-1
2,500 0-3,000
Maximum torque Nm 440 215
Tool holder 1/2" square
Weight (without battery pack) kg 2.4 1.4
DC800 DC810
L
PA
(sound pressure) dB(A) 97 92
K
PA
(sound pressure uncertainty) dB(A) 1.9 3
L
WA
(sound power) dB(A) 106 103
K
WA
(sound power uncertainty) dB(A) 1.9 3
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a
h
a
h
= m/s² 10.5 8
Uncertainty K = m/s² 1.7 2.2
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.