DC940 DC945 DC935 DC920 DC925
English 6 Copyright DEWALT 2
4 5 6 2 9 3 1 8 7 10 4 5 6 2 9 3 1 8 7 10 11 10 13 12 A 3
14 10 14 10 B 15 4 16 15 C 4 D
2 6 E F 5
ENGLISH CORDLESS DRIVER/DRILL DC940/DC945/DC935/DC920/DC925 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical data Drill DC940 Voltage VDC 12 DC945 DC935 DC920 DC925 12 14.
ENGLISH EC-Declaration of conformity DC940/DC945/DC935/DC920/DC925 DEWALT declares that these power tools have been designed in compliance with: 98/37/EC, 89/336/EEC, 73/23/EEC, 86/188/EEC, EN 60745-1, EN 60745-2-1, EN 60335, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3. For more information, please contact DEWALT at the address below, or refer to the back of the manual. DC940 LpA (sound pressure) Weighted RMS acceleration value dB(A) 88 m/s2 < 2.5 KpA (sound pressure uncertainty) dB(A) 2.
ENGLISH d Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 3 Personal safety a Stay alert, watch what you are doing and use common sense when operating a power tool.
ENGLISH b Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. c Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
ENGLISH Do not incinerate the battery pack Package contents The package contains: 1 Cordless midhandle driver/drill 1 Side handle 1 Charger 2 Battery packs (KB models) 1 Kitbox 1 Instruction manual 1 Exploded drawing Note: Battery packs and chargers are not included with N-models. ● Check for damage to the tool, parts or accessories which may have occurred during transport. ● Take the time to thoroughly read and understand this manual prior to operation. Description (fig.
ENGLISH Never use a light socket. Never connect the live (L) or neutral (N) wires to the earth pin marked E or . Using an extension cable An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see technical data). The minimum conductor size is 1 mm2; the maximum length is 30 m. Assembly and adjustment ● Prior to assembly and adjustment, always remove the battery pack.
ENGLISH ● If the pack is left in the charger after the initial charge, the charger will automatically initiate the refresh mode. This mode will continue up to 8 hours, but the battery pack can be removed at any time during the refresh mode. Hot/Cold Pack Delay When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has reached an appropriate temperature.
ENGLISH Drilling (fig. A) ● Select the drilling mode using the collar (4). ● Select forward rotation. Drilling in metal ● Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. Drilling in wood ● Use the appropriate type of drill bit. Consult your dealer for further information on the appropriate accessories. Maintenance Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance.
ENGLISH GUARANTEE ● 30 DAY NO RISK SATISFACTION GUARANTEE ● If you are not completely satisfied with the performance of your DEWALT tool, simply return it within 30 days, complete as purchased, to the point of purchase, for a full refund or exchange. Proof of purchase must be produced. ● ONE YEAR FREE SERVICE CONTRACT ● If you need maintenance or service for your DEWALT tool, in the 12 months following purchase, it will be undertaken free of charge at an authorized DEWALT repair agent.
Ireland DEWALT Calpe House Rock Hill Black Rock, Co. Dublin Tel: 00353-2781800 Fax: 00353-2781811 www.dewalt.ie United Kingdom DEWALT 210 Bath Road Slough, Berks SL1 3YD Tel: 01753-56 70 55 Fax: 01753-57 21 12 www.dewalt.co.
