Extra Information

10
ENGLISH
Do not incinerate the battery pack
Package contents
The package contains:
1 Cordless midhandle driver/drill
1 Side handle
1 Charger
2 Battery packs (KB models)
1 Kitbox
1 Instruction manual
1 Exploded drawing
Note: Battery packs and chargers are not included
with N-models.
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
Your cordless driver/drill DC940/DC920 has been
designed for professional drilling and screwdriving
applications.
Your cordless driver/percussion drill DC945/DC935/
DC925 has been designed for professional drilling,
percussion drilling and screwdriving applications.
1 Variable speed switch
2 Forward/reverse slider
3 Keyless chuck/auto spindle lock
4 Mode selector/torque adjustment collar
5 Collar settings
6 Three-gear selector
7 Bit holder
8 Grip
9 Side handle
10 Battery pack
Charger
Your DE9130 charger accepts D E WALT NiMH and
NiCd battery packs ranging from 7.2 to 18 V at 1.3
to 2.6 Ah.
10 Battery pack
11 Release buttons
12 Charger
13 Charging indicator (red)
Auto-spindle lock
The auto-spindle lock is engaged when the
transmission is stationary. The chuck sleeve can
easily be turned with one hand while the other
supports the unit.
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D E WALT charger is double
insulated in accordance with EN 60745
& EN 60335.
Mains plug replacement
(U.K. & Ireland only)
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D E WALT repair agent or a qualifi ed electrician.
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fi t 13 Amperes BS1363A approved plugs
tted with the correctly rated fuse (1).
The cable wire colours, or a letter, will be
marked at the connection points of most
good quality plugs. Attach the wires to their
respective points in the plug (see below). Brown
is for Live (L) (2) and Blue is for Neutral (N) (4).
Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable fi rmly and that the two
leads are correctly fi xed at the terminal screws.