Use and Care Manual

14
English
TROUBLESHOOTING
PROBLEM SOLUTION
Unit will not start • Check battery installation.
• Check battery charging
requirements.
• Check that the battery-select
switch is not in the "OFF" position.
• Ensure there is a battery in the
selected battery port.
Battery won’t charge
• Insert battery into charger until red
charging light illuminates. Charge up
to 8 hours if battery is totally drained.
• Plug charger into a working outlet.
Refer to Important Charging
Notes for more details.
• Check current at receptacle by
plugging an appliance into it.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the lights.
• Move charger and tool to a
surrounding air temperature of
above 40°F (4.5°C) or below
105°F (40.5°C).
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing, call
1-800-4-D
eWALT (1-800-433-9258) for a free replacement.