User Manual

8
ENGLISH
Description (Fig.A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Auto On/Off switch
2
Battery
3
Battery release button
4
Safety valve
5
Tank pressure gauge
6
One‑Turn regulator
7
Drain valve
8
Check valve
9
Quick‑connect coupler
10
Carry handle
11
Tank
Intended Use
Your compressor is designed for professional finish nailing and
staplingapplications.
DO NOT use under wet conditions or in the presence
of flammable liquids orgases. DO NOT use or store the
compressor at temperatures below 0°C.
Your compressor is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into thehousing.
Example:
2020 XX XX
Year of Manufacture
Important Information
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before
operating or maintaining this compressor. Most accidents that
result from compressor operation and maintenance are caused by
the failure to observe basic safety rules or precautions. An accident
can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety
procedures. Basic safety precautions are outlined in the “SAFETY”
section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions. Hazards
that must be avoided to prevent bodily injury or machine damage
are identified by WARNINGS on the compressor and in this
InstructionManual.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earand eyeprotection.
Air tankcapacity.
Approx. cut‑outpressure.
Airdisplacement.
Oil‑lesspump.
Set outlet pressure to zero before the air hose is
attached orremoved.
Risk of hightemperatures.
CAUTION: the compressor contains some parts
which might reach hightemperatures.
Risk of accidental start‑up.
NOTICE: The compressor could start
automatically in case of a black‑out and
subsequentreset.
WARNING: Compressor unit may start
withoutwarning.
Outdoor noise level
Package Contents
The package contains:
1 Air compressor
2 Li‑Ion battery packs (T2 models only)
1 Charger (T2 models only)
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by
DeWALT
is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.