Instruction Manual Guide D’utilisation Manual de instrucciones DCD470 60V Max* In-Line Stud and Joist Drill with E-Clutch® System Perceuse pour poteaux et solives alignés 60 V max* avec système E-ClutchMD Taladro de montante y viga en línea 60 V Máx* con sistema E-Clutch® If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-DeWALT final page size: 8.5 x 5.
English English (original instructions) 1 Français (traduction de la notice d’instructions originale) 13 Español (traducido de las instrucciones originales) 27
English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
English GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. c) d) The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
English work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. h ) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. 5) Battery Tool Use and Care a ) Recharge only with the charger specified by the manufacturer.
English Air vents often cover moving parts and should be avoided. Loose clothes, jewelry or long hair can be caught in moving parts. The label on your tool may include the following symbols. The symbols and their definitions are as follows: V.......................... volts or AC/DC..... alternating or direct current Hz........................ hertz ....................... Class II min...................... minutes Construction or DC....... direct current (double insulated) .......................
English battery. When the FLEXVOLT™ battery is in a 60V Max* or a 120V Max* (two 60V Max* batteries) product, it will operate as a 60V Max* battery. Shipping Mode: When the cap is attached to the FLEXVOLT™ battery, the battery is in Shipping Mode. Strings of cells are electrically disconnected within the pack resulting in three batteries with a lower Watt hour (Wh) rating as compared to one battery with a higher Watt hour rating.
English • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is, 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.
English The compatible charger(s) will not charge a faulty battery pack. The charger will indicate faulty battery pack by refusing to light. NOTE: This could also mean a problem with a charger. If the charger indicates a problem, take the charger and battery pack to be tested at an authorized service center.
English This heavy-duty stud and joist drill is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Torque WARNING: This is a high-torque drill.
English Speed Selector (Fig. A) 11 NOTICE: Risk of tool damage. Do not rotate the speed selector lever while the drill is running or coasting, damage may occur to the tool. Rotate the speed selector dial 6 to the desired speed: 1 (·) = low speed (high torque) 2 (··) = high speed (low torque) NOTE: The first time the tool is run after changing speeds, you may hear a click on start up. This is normal and does not indicate a problem. 16 Variable Speed Trigger (Fig.
English WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Always hold tool firmly with both hands in the proper position for operation as shown. Fig. L Fig. J 13 OPERATION WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury.
English cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. NOTE: Large [5/16" (8 mm) to 1/2" (13 mm)] holes in steel can be made easier if a pilot hole [5/32" (4 mm) to 3/16" (5 mm)] is drilled first. NOTE: When using a cutting lubricant, be sure not to get the lubricant on the tool. Drilling in Wood Start drilling with slow speed and increase to full power while applying firm pressure on the tool.
English WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product. • CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase. • FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. Register online at www.DeWALT.
Français Définitions : symboles et termes d'alarmes sécurité Ces guides d'utilisation utilisent les symboles et termes d'alarmes sécurité suivants pour vous prévenir de situations dangereuses et de risques de dommages corporels ou matériels. DANGER : indique une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou des blessures graves.
Français AVERTISSEMENTS GÉNÉRAUX SUR LA SÉCURITÉ DES OUTILS AVERTISSEMENT : lisez tous les avertissements de sécurité, toutes les instructions, les illustrations et les caractéristiques fournis avec cet outil électrique. Ne pas suivre toutes les instructions comprises aux présentes peut conduire à un choc électrique, un incendie et/ou des blessures graves.
Français b ) Ne pas utiliser un outil électrique dont l’interrupteur est défectueux. Tout outil électrique dont l’interrupteur est défectueux est dangereux et doit être réparé. c ) Débranchez la fiche de la prise électrique et, si amovible, retirez le bloc-piles de l’outil avant d’effectuer tout ajustement, changement et entreposage de celui-ci. Ces mesures préventives réduisent les risques de démarrage accidentel de l’outil électrique.
Français NE sont PAS des lunettes de protection. Utiliser aussi un masque antipoussières si la découpe doit en produire beaucoup. PORTER SYSTÉMATIQUEMENT UN ÉQUIPEMENT DE SÉCURITÉ HOMOLOGUÉ : • Protection oculaire ANSI Z87.1 (CAN/CSA Z94.3) ; • Protection auditive ANSI S12.6 (S3.19) ; • Protection des voies respiratoires NIOSH/OSHA/ MSHA.
Français • • • • • NE PAS éclabousser le bloc-piles ou l’immerger dans l’eau ou dans tout autre liquide. Ne pas entreposer ou utiliser l’appareil et le blocpiles en présence de températures ambiantes pouvant excéder 40 °C (104 °F) (comme dans des hangars ou des bâtiments métalliques l’été). Pour préserver leur durée de vie, entreposer les blocs-piles dans un endroit frais et sec. REMARQUE : ne pas mettre un bloc-piles dans un outil dont la gâchette est verrouillée en position de marche.
Français Chargé de 75 à 100 % Chargé de 51 à 74 % Chargé de < 50 % Directives de sécurité importantes propres à tous les chargeurs de piles Le bloc-piles doit être rechargé Pour activer le témoin de charge, maintenez appuyé le bouton du témoin de charge. Une combinaison des trois voyants Del verts s’allumera indiquant le niveau de charge. Lorsque le niveau de charge du bloc-pile atteint la limite minimale d’utilisation, le témoin de charge reste éteint et le bloc-piles doit être rechargé. Fig.
Français Calibre minimum pour les cordons d'alimentation Longueur totale du cordon Volts d'alimentation en mètre (pieds) 120 V 7,6 (25) 15,2 (50) 30,5 (100) 45,7 (150) 240 V 15,2 (50) 30,5 (100) 61,0 (200) 91,4 (300) Ampères Plus que Pas plus AWG que 0 6 18 16 16 14 6 10 18 16 14 12 10 12 16 16 14 12 12 16 14 12 Non recommandé • Ne poser aucun objet sur le chargeur. Ne pas mettre le chargeur sur une surface molle qui pourrait en bloquer la ventilation et provoquer une surchauffe interne.
Français REMARQUE : cela pourra aussi indiquer un problème avec le chargeur. Si le problème provient du chargeur, faites vérifier le chargeur et le bloc-piles chez un centre de réparation agréé. Fonction de suspension de charge contre le chaud/ froid Lorsque le chargeur détecte un bloc-piles trop chaud ou trop froid, il démarre automatiquement la fonction de suspension de charge contre le chaud, suspendant le chargement jusqu’à ce que le bloc-piles ait repris une température appropriée.
Français REMARQUE : les blocs-piles ne devraient pas être entreposés complètement déchargés. Il sera nécessaire de recharger le bloc-piles avant réutilisation. ou le corps de l’outil contre un poteau pour un meilleur soutien (Fig. D). Fig. D CONSERVER CES CONSIGNES POUR UTILISATION ULTÉRIEURE 5 DESCRIPTION (FIG. A) AVERTISSEMENT : ne jamais modifier l’outil électrique ni aucun de ses composants, car il y a risques de dommages corporels ou matériels.
Français Poignée supérieure (Fig. E) Bouton Avancer/Reculer (Fig. A) Une poignée supérieure 4 fixée est fournie pour transporter l’outil et pour l'utiliser comme poignée supplémentaire. Fig. E 4 Un bouton Avancer/Reculer 9 détermine le sens de l’outil. Il est situé à l’avant de la gâchette. Pour sélectionner la rotation vers l’avant, relâchez la gâchette 7 et appuyez sur le bouton Avancer/Reculer à droite de l’outil.
Français main. Placez la clé de mandrin ( 11 , Fig. A) dans chacun des trois trous et serrez dans le sens des aiguilles d’une montre. Il est important de serrer le mandrin avec tous les trois trous. Pour retirer la mèche, tournez le mandrin dans le sens contraire des aiguilles d’une montre dans un trou seulement, puis desserrez le mandrin à la main.
Français AVERTISSEMENT : pour réduire tout risque de dommages corporels graves, maintenir SYSTÉMATIQUEMENT l’outil fermement pour anticiper toute réaction soudaine. Tenez toujours l’outil solidement avec les deux mains dans la position appropriée pour l’utilisation comme illustré. Fig. L 5. Pour minimiser le blocage ou le bris du matériau, réduisez la pression sur la perceuse et facilitez le passage de la mèche dans la dernière partie du trou. 6.
Français Dépannage pour le perçage dans la maçonnerie Problème Solution Accumulation de poussière dans la • Retirez régulièrement la mèche de forage. mèche pour évacuer les copeaux. Vérifiez le filtre de L’accumulation de poussière dépoussiérage. Nettoyez ou ralentit la vitesse de perçage. remplacez s’il y a lieu. La vitesse de rotation peut ne pas • Consultez les Capacités être appropriée. maximales recommandées pour les cotes de vitesse appropriées. Usure des segments trop rapide.
Français l’usage abusif de l’outil. Pour obtenir de plus amples renseignements sur les pièces ou les réparations couvertes par la présente garantie, visiter le site www.DeWALT. com ou composer le 1 800 433-9258 (1 800 4-DeWALT). CETTE GARANTIE LIMITÉE REMPLACE TOUTE AUTRE GARANTIE, Y COMPRIS TOUTE GARANTIE IMPLICITE DE QUALITÉ MARCHANDE OU DE CONFORMITÉ À DES FINS PARTICULIÈRES, ET EXCLUT TOUT DOMMAGE ACCESSOIRE OU INDIRECT.
Español Definiciones: Símbolos y Palabras de Alerta de Seguridad Este manual de instrucciones utiliza los siguientes símbolos y palabras de alerta de seguridad para alertarle de situaciones peligrosas y del riesgo de lesiones corporales o daños materiales. PELIGRO: Indica una situación de peligro inminente que, si no se evita, provocará la muerte o lesiones graves. ADVERTENCIA: Indica una situación de peligro potencial que, si no se evita, podría provocar la muerte o lesiones graves.
Español ADVERTENCIAS GENERALES DE SEGURIDAD PARA HERRAMIENTAS ELÉCTRICAS ADVERTENCIA: Lea todas las advertencias de seguridad, instrucciones, ilustraciones y especificaciones incluidas con esta herramienta eléctrica. La falla en seguir todas las instrucciones siguientes puede resultar en descarga eléctrica, incendio y/o lesiones serias.
Español 4) Uso y Mantenimiento de la Herramienta Eléctrica a ) No fuerce la herramienta eléctrica. Utilice la herramienta eléctrica correcta para el trabajo que realizará. Si se la utiliza a la velocidad para la que fue diseñada, la herramienta eléctrica correcta permite trabajar mejor y de manera más segura. b ) No utilice la herramienta eléctrica si no puede encenderla o apagarla con el interruptor.
Español • • • eléctrica también se activen con electricidad y que el operador sufra una descarga eléctrica. Use abrazaderas u otra manera práctica de fijar y sujetar la pieza de trabajo a una plataforma estable. No sujete su trabajo en forma manual o contra su cuerpo pues no quedará estable y podría perder el control. Use lentes de seguridad u otra protección ocular. Las operaciones de martilleo y taladro producen astillas en vuelo. Las partículas en vuelo pueden provocar daño permanente a los ojos.
Español • • • • • • • • batería, el cargador y la herramienta eléctrica. No seguir las advertencias y las instrucciones puede provocar una descarga eléctrica, un incendio y/o lesiones graves. No cargue o use la unidad de batería en atmósferas explosivas, como en presencia de líquidos, gases o polvos inflamables. Puede que al insertar o sacar la unidad de batería del cargador se inflamen el polvo o los gases. NUNCA fuerce la unidad de batería para que entre en el cargador.
Español la unidad de batería será considerada tres baterías con la capacidad nominal de vatios-hora indicada para «Transporte». Si se transporta sin la tapa o en una herramienta, la unidad de batería será considerada una batería con la capacidad nominal de vatios-hora indicada al lado de «Uso».
un calibre insuficiente causará una caída en la tensión de la línea dando por resultado una pérdida de energía y sobrecalentamiento. Cuando se utilice más de un alargador para completar el largo total, asegúrese que los hilos de cada alargador tengan el calibre mínimo. La tabla siguiente muestra el tamaño correcto a utilizar, dependiendo de la longitud del cable y del amperaje nominal de la placa de identificación. Si tiene dudas sobre cuál calibre usar, use un calibre mayor.
Español DCB107, DCB112, DCB113, DCB115, DCB118, DCB132 Unidad en Proceso de Carga Unidad Cargada Restraso por Unidad Caliente/ Fría* * DCB107, DCB112, DCB113, DCB115, DCB118, DCB132: La luz roja continuará parpadeando, pero una luz indicadora amarilla estará iluminada durante esta operación. Una vez que la batería haya llegado a una temperatura apropiada, la luz amarilla se apagará y el cargador continuará con el procedimiento de carga. El cargador no cargarán una batería defectuosa.
Español Desenchufe siempre el cargador de la toma de corriente cuando no haya una unidad de batería en su cavidad. Desenchufe el cargador antes de intentar limpiarlo. 6. No congele ni sumerja el cargador en agua o cualquier otro líquido. Recomendaciones de almacenamiento 1. El mejor lugar de almacenamiento es uno que sea fresco y seco, lejos de la luz solar directa y del exceso de calor o frío. 2.
Español INDICADOR DIAGNÓSTICO SOLUCIÓN Apagado SÓLIDO La herramienta está funcionando normalmente El sistema E-Clutch® se ha activado (CONECTADO) Siga todas las advertencias e instrucciones al operar la herramienta. Con la herramienta correctamente apoyada, libere el gatillo. La herramienta funcionará normalmente cuando se presione nuevamente el gatillo y se apague la luz indicadora Manija Superior (Fig.
Español 11 16 de herramienta DeWALT está diseñada para rastrear y ubicar herramientas, equipos y máquinas eléctricas profesionales con la aplicación DeWALT Tool Connect™. Para la instalación correcta de la etiqueta de herramienta DeWALT, consulte el manual de Etiqueta de herramienta DeWALT. Para obtener más información, visite: www.DeWALT.com/en-us/jobsite-solutions/tool-connect Fig. J Instalación y Liberación de Broca (Fig.
Español Fig. K 3. 4. 5. Posición adecuada de las manos (Fig. L) ADVERTENCIA: Para reducir el riesgo de lesión personal grave, tenga SIEMPRE las manos en una posición adecuada como se muestra. ADVERTENCIA: Para reducir el riesgo de lesión personal grave, sujete SIEMPRE bien en caso de que haya una reacción repentina. Siempre sostenga la herramienta firmemente con ambas manos en la posición correcta para operar como se muestra. Fig. L 6.
Español Solución de Problemas de Perforación en Mampostería Problema Solución La broca del núcleo no corta. • Elija una broca de núcleo más apropiado (con segmentos más Material demasiado duro para suaves). la broca. accesorio, póngase en contacto con DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, llame al 1-800-4-DeWALT (1-800-433-9258) o visite nuestro sitio web: www.DeWALT.com.
Español PUEBLA, PUE 17 Norte #205 - Col. Centro (222) 246 3714 QUERETARO, QRO Av. San Roque 274 - Col. San Gregorio (442) 2 17 63 14 SAN LUIS POTOSI, SLP Av. Universidad 1525 - Col. San Luis (444) 814 2383 TORREON, COAH Blvd. Independencia, 96 Pte. - Col. Centro (871) 716 5265 VERACRUZ, VER Prolongación Díaz Mirón #4280 - Col. (229) 921 7016 Remes VILLAHERMOSA, TAB Constitución 516-A - Col.
Español 3 AÑOS DE SERVICIO GRATUITO PARA UNIDADES DE ALIMENTACIÓN DEWALT DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT, DCB206, DCB230, DCB606, DCB609, DCB612 NOTA: La garantía del producto quedará nula si la unidad de batería ha sido alterada de cualquier manera. DeWALT no es responsable de ninguna lesión causada por alteraciones y podría iniciar un procedimiento judicial por fraude de garantía hasta el máximo grado permisible por la ley.
DeWALT BATTERY AND CHARGER SYSTEMS Chargers/Charge Time (Minutes) . Chargeurs/Durée de charge (Minutes) .